Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: MI-STAP-SF Side Folder

  1. #11
    Join Date
    Jun 2006
    Location
    Waukesha WI
    Posts
    749
    Feedback Score
    1 (100%)
    Thanks for the suggestion. We will be releasing a very simple and affordable solution for those that want a fast on or off set up.

    Troy
    MI

  2. #12
    Join Date
    Mar 2017
    Location
    SeattHELL, Soviet Socialist S***hole of Washington
    Posts
    8,404
    Feedback Score
    5 (100%)
    Some thoughts from Quick & Dirty prototyping on my Charger build, using a Leapers MNT-RSQD403 optic riser as QD proof-of-concept:

    1. With the added length of the riser, you lose both Positions 5 and 6 with pistol braces to stay below the 13.5" limit if I'm measuring right. One your own QD conversion becomes available to replace the crossbolt, that should reopen Position 5.
    2. With SB Tactical adjustable braces (A3 and A4), you also lose Position 1 unless you chop off the front 1/4" "lip" and cut a hole for the tube and bottom keyway in the brace's rear. (About where the SB logo is.)
    3. A SOPMOD stock fully collapses into Position 1 and will lock in folded position, but the saddlebags mean it will be a few degrees off parallel to bore-axis. The more you extend the stock before folding the closer you can get.



    This pic has brace and stock "normalized" to correspond to both being in Full Collapse position. You guys have a solid product, and if BATFEces doesn't bugger us on pistol braces, once I pass the kidneystone of stocking up on soon-to-be-banned-in-WA mags and you roll out the QD conversion I can easily see myself buying a second for this project's stock assembly.
    <><><><><><><><><><><><><><><><><><><><><><><><>
    Ye best start believin' in Orwellian Dystopias, mateys... yer LIVIN' in one!--after Capt. Hector Barbossa
    Psalms 109:8, 43:1
    LIFE MEMBER - NRA & SAF; FPC MEMBER Not employed or sponsored by any manufacturer, distributor or retailer.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •