A folding stock BRN-180

[Rrotz]

https://hagadefense.com/1913-adapter...-zhukov-stock/
you have to drill out a rivet on the Magpul Zhukov stock to remove the AK adapter, and to install the Haga picatinny hinge adapter. pretty straight-forward.

It comes pre-installed when you buy from....the site name escapes me at the moment.....I'll try to find it.....

Sent from my SM-G998U using Tapatalk

[rpoL98]

It comes pre-installed when you buy from....the site name escapes me at the moment.....I'll try to find it.....

Sent from my SM-G998U using Tapatalk

darn, why do I always end up doing it the HARD way? crap...

[Rrotz]

ACR 1913 adapters are resupplied at Haga Defense as well. I'm going to try an ACR stock on the 180 next.

Sent from my SM-G998U using Tapatalk

[Rrotz]

Haga, actually sells the Zhukov and folding adapter pre-installed. Brain Fart.

I also ordered the Haga stock and Midwest Industries 1913 left folding adapter.

Sent from my SM-G998U using Tapatalk

[Ron3]

I'm interested in one.

But I've read many experiences of failing to return to battery and light strikes, which could be related.

A $900 upper shouldn't be a gamble but apparently it is.

Any experiences or thoughts about the current batch of Gen 2 BRN 180 uppers?

[rpoL98]

mine works fine, right from the get-go. it's a Gen 2. std AR-15 lower with KNS pic end plate. I'm liking it.

[Ron3]

mine works fine, right from the get-go. it's a Gen 2. std AR-15 lower with KNS pic end plate. I'm liking it.

Thanks.

Been reading reports of everything between once a magazine to once every 100 rds or so.

It seems to be the bolt stopping just short of in battery. A tap sends in forward or the hammer does, with the result of a light or no strike.

Guys are able to recreate the issue with dummy rounds and cycling manually.

Some guys dont mind too much because to them it's a collectable / hobby gun. But I'd like it to be a defense rifle and it would need to be 100%.

[Rrotz]

If you're concerned about it out of the box PWS will replace the bolt, free of charge. They did door 3 of mine and I passed the 2000 round tear with zero stoppages.

Sent from my SM-G998U using Tapatalk

[Ron3]

If you're concerned about it out of the box PWS will replace the bolt, free of charge. They did door 3 of mine and I passed the 2000 round tear with zero stoppages.

Sent from my SM-G998U using Tapatalk

Excellent!

Was there a problem with the original bolts on yours?

[Rrotz]

Excellent!

Was there a problem with the original bolts on yours?

No, 1000 rounds without a hiccup on 2 BRNs but they were giving them away for BRN owners so I collected....and they gave birth or cloned or were generically modified....



Sent from my SM-G998U using Tapatalk