Which spare parts to keep for Glocks?

[grizzlyblake]

I searched and found an old thread on this but it wasn't much help.

I'm looking for a list of what basic spare parts should I get for my Gen 5 G19s and G43.

Sort of like for my ARs I keep a bolt, gas rings, extractor spring, firing pin, cam and cotter.

Thanks!

[MegademiC]

Recoil spring
Striker spring
Mag release spring
Mag release
Magazine spring
Extractor spring

[17K]

Trigger bar, connector, channel liner are the most replaced parts IME.

[Disciple]

When does the channel liner need to be replaced? I have the firing pin spacer sleeve and spring cups on my list, but not that.

[mark5pt56]

When does the channel liner need to be replaced? I have the firing pin spacer sleeve and spring cups on my list, but not that.

If someone snaps the striker while the slide is off the frame.

My experience when I had free ammo is most folks can't afford to break a Glock. I've broken two parts on the same gun, Gen 3 G17. Trigger spring-one thing I found is that the trigger will reset if you are aggressive on the reset, meaning running the gun like a rented mule. Locking block pin, removed the remaining half and slide stop and shot it a few more days. The spring was around 40k and the pin, around 75k. I had a gen 4 19 that had over 50k, no breakage. I would run each for at least a week before cleaning but would always hit the connector with a drop. Used grease on the slide/barrel, even in the winter which was as low as 10-15 outside

Having said that I have every part but the barrel to replace on gen 3/4 17/19/26 and a Gen 5 19, even locking blocks

[pag23]

RSA and springs in my opinion. I heard the Gen 5 slide lock spring is a good one to have, along with the trigger housing...

[Disciple]

If someone snaps the striker while the slide is off the frame.

How does that damage the channel liner?

[flenna]

Recoil spring
Striker spring
Mag release spring
Mag release
Magazine spring
Extractor spring

^^^^^ Add a couple of strikers and you are set.

[202]

Recoil Spring Assembly (RSA), stricker, striker spring, extractor spring. Although, to be honest, it will be a long time before you need to replace any of that.
The most important items are a dozen magazines per handgun and ammo.

[Tanner]

Another glock ?