Originally Posted by
99Bubba
Originally Posted by
Leonidas24
I might be able to work up something with Strelok+. Is there a particular optic and mount height you're interested in? It'll all be approximate, and based around data I have on hand for KS in 110 degree heat with 70% humidity.
Yes please...for a 14.5 " barrel M4, carry handle sight . I will zero at 50 yds, and never shoot over 200 yds.
Just to try to clear up some issues, on a typical AR carbine with iron sights, the sight height over bore center line is usually about 2.6" or 2.7" It can actually change depending on your sight adjustment. Most people use 2.6" in their ballistic calculator calculations (for sight height), and this should work fine.
The flat top surface of the standard AR upper receiver (top of the rail) is 1.250" above the bore center line. Most scope mounts for an AR seem to put the scope center line about 1" or 1.5" above that. So the number you would plug into the ballistic calculator for sight height would be about 2.25" or 2.75"
If you plug different numbers (for sight height) into a ballistic calculator with all other numbers being equal, you will probably see that small differences are not very significant, but big differences are. That being said, I try to be as exact as possible. I feel like it gives you more room for error with other factors like ammo type, temperature, etc.
Joe Mamma
Last edited by Joe Mamma; 09-15-21 at 10:28.
"Reliability above all else"
NRA Certified Pistol and Rifle Instructor, Life Member
Glock Certified Armorer
Beretta & Sig Sauer Certified Pistol Armorer
Colt Certified 1911 & AR-15/M16/M4 Law Enforcement Armorer
Bookmarks