What BUIS are you guys using with your 1.93"+ tall optic mounts? Are there any good co-witness options or do you use standard height sight and a QD optic mount? Or maybe no BUIS at all? TIA
|
||||||||||||||||||||||||||||||||||||||
Site Sponsor
What BUIS are you guys using with your 1.93"+ tall optic mounts? Are there any good co-witness options or do you use standard height sight and a QD optic mount? Or maybe no BUIS at all? TIA
Gettin' down innagrass.
Let's Go Brandon!
Senior Member
Not aware of any tall BUIS. Think the Unity Tactical FAST you can look under the T1, I have an aimpoint PRO on a Bobro 1/3rd QD mount that sits on a riser... no way I can see my BUIS with out detaching my QD mount.Originally Posted by titsonritz
Maybe using some 45 deg offset BUIS would be best?
Interested to hear what others have to say.
Senior Member
QD optic mount. Standard height BUIS.
AQ planned for years and sent their A team to carry out the attacks, and on Flight 93 they were thwarted by a pick-up team made up of United Frequent Fliers. Many people look at 9/11 and wonder how we can stop an enemy like that. I look at FL93 and wonder, "How can we lose?". -- FromMyColdDeadHand
Senior Member
I'm told that Scalarworks is coming out with 1.93 height irons, but I don't have any idea when. On my one 1.93 gun which is an Aimpoint Pro with the SKD 1.93 riser in the Aimpoint LRP mount, I'm just running Magpul PRO MBUS that were zeroed prior to the optic install. I'd either use the optic window as a donut of death or ditch it and switch to irons.
The 2.26 guns with Unity FAST micro mount is my preferred red dot combo, I use the built in rear sight with either a FSB or folding front sight depending on the upper. My wife does not like the tall mounts so I have her 6920 setup with an Aimpoint PRO and SKD 1.73 riser. It's much better than the traditional 1.5-1.6 lower 1/3 height and you can still use the irons if need be.
Site Sponsor
Site says Sept 2022, so what summer 2023?
https://scalarworks.com/shop/iron-sights/peak-02/
Gettin' down innagrass.
Let's Go Brandon!
Site Sponsor
This is where I am right now.
I suspected (and am glad to hear) Scalarworks is working on it, I asked them about it a couple years ago. Thanks for the info guys.
Gettin' down innagrass.
Let's Go Brandon!
Senior Member
That’s where I was. I am moving to offset RDS on my rifles.
AQ planned for years and sent their A team to carry out the attacks, and on Flight 93 they were thwarted by a pick-up team made up of United Frequent Fliers. Many people look at 9/11 and wonder how we can stop an enemy like that. I look at FL93 and wonder, "How can we lose?". -- FromMyColdDeadHand
Site Sponsor
That is what I do with my with the LPVO guns but I wanted to BUIS for the RDS/EoTech guns. I have 3, maybe 4, 1/3 lower mounts I want to replace with taller mounts that current also have BUIS.
Gettin' down innagrass.
Let's Go Brandon!
Senior Member
As your primary optic?
Andy
Senior Member
No. I have razor 1-6s on both of my rifles.
AQ planned for years and sent their A team to carry out the attacks, and on Flight 93 they were thwarted by a pick-up team made up of United Frequent Fliers. Many people look at 9/11 and wonder how we can stop an enemy like that. I look at FL93 and wonder, "How can we lose?". -- FromMyColdDeadHand
Posting Permissions
Reply With Quote
Bookmarks