Page 1 of 16 12311 ... LastLast
Results 1 to 10 of 160

Thread: Which would you choose given the parameters.....

  1. #1
    Join Date
    Dec 2006
    Location
    Tennessee
    Posts
    11,718
    Feedback Score
    0

    Which would you choose given the parameters.....

    SD/HD gun , but live out in the country and might have to bang it at a decent distance. Could be meth-heads with body armor, who knows. I'm not going to Ukraine or to Taiwan, but some of those "battlefield" issued ammo specs would come in handy. Which one be bestest for all-'round use?

    MK 318

    MK262

    M855A1

    The vaunted "FBI" load M556FBIT3
    Last edited by ABNAK; 08-20-22 at 20:16.
    11C2P '83-'87
    Airborne Infantry
    F**k China!

  2. #2
    Join Date
    Mar 2017
    Location
    SeattHELL, Soviet Socialist S***hole of Washington
    Posts
    8,367
    Feedback Score
    5 (100%)
    Based on availability right now I go Mk262. Haven't seen A1 on the civilian market, and availability on SOST and T3 (both FBI and SBC) seem to be dried up. So in that position, as soon as a Free Shipping promo drops I call up ol' Larry and get some more cases of IMI Razorcore 262 on the way...

    Take this with a grain, as most of your kids probably have more hands-on experience than I do, but if you can't get the Primo Shit you have to settle for what's the best, or sometimes Least Worst, of what you CAN.
    <><><><><><><><><><><><><><><><><><><><><><><><>
    Ye best start believin' in Orwellian Dystopias, mateys... yer LIVIN' in one!--after Capt. Hector Barbossa
    Psalms 109:8, 43:1
    LIFE MEMBER - NRA & SAF; FPC MEMBER Not employed or sponsored by any manufacturer, distributor or retailer.

  3. #3
    Join Date
    Sep 2007
    Posts
    3,747
    Feedback Score
    22 (100%)
    Quote Originally Posted by ABNAK View Post
    SD/HD gun , but live out in the country and might have to bang it at a decent distance. Could be meth-heads with body armor, who knows. I'm not going to Ukraine or to Taiwan, but some of those "battlefield" issued ammo specs would come in handy. Which one be bestest for all-'round use?

    MK 318

    MK262

    M855A1

    The vaunted "FBI" load M556FBIT3
    Assuming you have access to all of the above equally in terms of general purpose use A1 followed by SOST as a close second. FBIT3 is a great 200 yd and in load. I would put 262 dead last as a general purpose load unless you are doing a lot of shooting past 300 yds since it has the worst terminal performance out of all of the above.
    Last edited by vicious_cb; 08-20-22 at 21:43.
    Forward Ascertainment Group

  4. #4
    Join Date
    Dec 2006
    Location
    Tennessee
    Posts
    11,718
    Feedback Score
    0
    Quote Originally Posted by vicious_cb View Post
    Assuming you have access to all of the above equally in terms of general purpose use A1 followed by SOST as a close second. FBIT3 is a great 200 yd and in load. I would put 262 dead last as a general purpose load unless you are doing a lot of shooting past 300 yds since it has the worst terminal performance out of all of the above.
    Really? I thought maybe not so much for barrier penetration but for "soft" targets it was the shiznit. That said, yours isn't the first time I've heard that opinion.....hmmm.

    Appreciate the input.
    11C2P '83-'87
    Airborne Infantry
    F**k China!

  5. #5
    Join Date
    Mar 2017
    Location
    SeattHELL, Soviet Socialist S***hole of Washington
    Posts
    8,367
    Feedback Score
    5 (100%)
    Well, there's always the Doc's take...

    "Short barreled 5.56 mm weapons, such as the Colt Commando, Mk18 CQBR, HK416, HK53, HK G36C, etc… offer advantages in confined spaces.

    With SBR’s it is best to stick with the barrier blind loads recommended above*, although the heavy OTM’s suggested for long distance shooting will also work. SBR’s can run into rotational velocity issues with some loads, so it is generally best to select faster 1/7 twist barrels whenever possible. Remember, with SBR’s, effective engagement distances are significantly reduced compared to the longer barreled carbines."

    *If you have 1/9 or faster twist rate barrel (so 1/9, 1/8, and 1/7 twist):
    *** 5.56 mm Federal 62 gr Trophy Bonded Bear Claw (TBBC) bonded JSP (XM556FBIT3)
    *** 5.56 mm Winchester 64 gr solid base bonded JSP (Q3313/RA556B)
    *** Black Hills 5.56 mm 50 gr TSX loading.
    *** The Hornady 5.56 mm 55 gr GMX
    NOTE: that these are all true 5.56 mm loads that require a real milspec 5.56 mm chamber, not a SAAMI .223 chamber–be sure to check with an appropriate gauge or reamer.

    Most other acceptable LE barrier blind loadings are at .223 pressures including the following …
    *** .223 55 & 62 gr Federal bonded JSP Tactical loads (LE223T1 & LE223T3)
    *** Nosler 60 gr Partition JSP,
    *** Remington 62 gr Core-Lokt Ultra Bonded JSP (PRC223R4)
    *** .223 Federal 55 gr TSX (T223S)
    *** .223 Hornady 55 gr GMX
    *** .223 Speer 64 gr Gold Dot JSP‘s (and identically constructed Federal 62 gr Fusion JSP and Federal XM223SP1 62gr Bonded JSP).
    *** The Swift 75 gr Scirocco bonded PT is also good choice, but usually requires a 1/7 twist.

    Note that the Barnes all copper TSX bullets are great projectiles and offer good penetration through barriers, however, when first hitting a laminated automobile windshield intermediate barrier, most TSX bullets exhibit less expansion than bonded JSP’s, as the Barnes jacket either collapses at the nose, the jacket “petals” fold back against the core, or the “petals” are torn off; this results in a caliber size projectile configured a lot like a full wadcutter, leading to deep penetration.

    SOURCE: https://preparedgunowners.com/2016/0...enseduty-ammo/

    Unf, only T3 is on this list.
    Last edited by Diamondback; 08-20-22 at 23:08.
    <><><><><><><><><><><><><><><><><><><><><><><><>
    Ye best start believin' in Orwellian Dystopias, mateys... yer LIVIN' in one!--after Capt. Hector Barbossa
    Psalms 109:8, 43:1
    LIFE MEMBER - NRA & SAF; FPC MEMBER Not employed or sponsored by any manufacturer, distributor or retailer.

  6. #6
    Join Date
    Sep 2007
    Posts
    3,747
    Feedback Score
    22 (100%)
    Quote Originally Posted by ABNAK View Post
    Really? I thought maybe not so much for barrier penetration but for "soft" targets it was the shiznit. That said, yours isn't the first time I've heard that opinion.....hmmm.

    Appreciate the input.
    Its not a bad choice, just not ideal. In the 2000's anyone who paid attention to ammo performance was running OTM as a general purpose load, either 262 or TAP. Now that we have better options, OTMs especially 262 just doesnt offer anything except really good accuracy over any other load. Just how much accuracy do you need out of a general purpose load? If I wanted longer range performance and explosive terminal ballistics Id just use 77gr TMKs.
    Last edited by vicious_cb; 08-20-22 at 23:27.
    Forward Ascertainment Group

  7. #7
    Join Date
    Jul 2006
    Location
    Oregon
    Posts
    4,629
    Feedback Score
    2 (100%)
    I like the price and availability of Gold Dot these days.

  8. #8
    Join Date
    Jun 2014
    Location
    Kansas
    Posts
    1,688
    Feedback Score
    2 (100%)
    Quote Originally Posted by vicious_cb View Post
    Assuming you have access to all of the above equally in terms of general purpose use A1 followed by SOST as a close second. FBIT3 is a great 200 yd and in load. I would put 262 dead last as a general purpose load unless you are doing a lot of shooting past 300 yds since it has the worst terminal performance out of all of the above.
    Quote Originally Posted by vicious_cb View Post
    Its not a bad choice, just not ideal. In the 2000's anyone who paid attention to ammo performance was running OTM as a general purpose load, either 262 or TAP. Now that we have better options, OTMs especially 262 just doesnt offer anything except really good accuracy over any other load. Just how much accuracy do you need out of a general purpose load? If I wanted longer range performance and explosive terminal ballistics Id just use 77gr TMKs.
    Excellent summary, and spot-on analysis.
    It's f*****g great, putting holes in people, all the time, and it just puts 'em down mate, they drop like sacks of s**t when they go down with this.
    --British veteran of the Ukraine War, discussing the FN SCAR H.

  9. #9
    Join Date
    Mar 2008
    Posts
    3,269
    Feedback Score
    8 (100%)
    Two of the choices on your list are unobtainium, MK318 will likely never be made again and M855A1 will never be released for commercial sale. Yes you might be able to find small mixed lots of either at ridiculous prices but I don't believe you will ever be able to order a case from a dealer. Just to get ahead of the A1 fanboys (hey I'm one too, wish I could get some), the reason it will never be released is due to liability, it is not a round suitable to use in non mil-spec rifles not using mil-spec magazines. Joe Bob shooting A1 in his bargain basement polymer lower, overgassed AR with 4140 nitrated barrel using green follower mags might have some issues.
    Last edited by mack7.62; 08-21-22 at 08:40.
    “The Trump Doctrine is ‘We’re America, Bitch.’ That’s the Trump Doctrine.”

    "He is free to evade reality, he is free to unfocus his mind and stumble blindly down any road he pleases, but not free to avoid the abyss he refuses to see."

  10. #10
    Join Date
    Jan 2019
    Posts
    2,584
    Feedback Score
    1 (100%)
    Israeli Mk262 if you're wanting a good mix of price, terminal performance, and grouping. Ask yourself this, though. Are you a good enough combat marksman that the minute difference in group size offered by that more expensive ammo is going to make a big difference? I'll say right up front that I'm not.

    Also keep in mind that to realize that difference you not only have to be a very good combat marksman, but you also have to train with the ammo you shoot so you know where your holds are and to make sure your optic is always dead nuts zeroed. When you're splitting hairs, you can't just sight in with the good stuff and then practice with something else. Your holds will be all over the place. You would be much better off getting something affordable that you can practice with and knowing exactly where your holds are.

    Which brings up another point. Do you have the ability to set up a range where you can shoot at 300 plus meters? If not, there's not much point in using match grade ammo.

    Whatever you end up doing, I wouldn't use the A1. Nobody knows where that stuff is coming from. For all we know it's the rejects. Whoever is leaking the stuff is breaking the law, so they're probably not above selling subpar or even dangerous ammo. If I had any, I would sell it for big bucks and replace it with something affordable that's a known source.

Page 1 of 16 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •