I got this new barrel. It is nitrided.
The start of the rifling (is there a word for that) looks uneven as if it was squished down. https://i.imgur.com/u3cQl3B.png
For reference this is my criterion. https://i.imgur.com/Ri9MlNG.png
I got this new barrel. It is nitrided.
The start of the rifling (is there a word for that) looks uneven as if it was squished down. https://i.imgur.com/u3cQl3B.png
For reference this is my criterion. https://i.imgur.com/Ri9MlNG.png
That does not look good. The land/groove goes flat, and then there appears to be a high burr too.
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
It does not "go flat" it it the start of the rifling you are seeing. Right by the chamber. But the burr does concern me.
Gotcha. Hard to tell with the scope view the orientation. Normally the only burrs you can live with are from the port reaming. And with the nitride, that burr might be tough to shoot smooth. Can you see that with the naked eye looking into the bore??
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
Not really, no
Well I'd shoot it and see. If it's a disaster in accuracy, you have a solid pic to send the dealer/manufacturer.
"What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v
Well, did they live up to their promise and give you a bad attitude?
Bookmarks