Century Arms MKE AP5-P....buy it or you will regret it later.

[SteyrAUG]

They work. It’s just that I swapped the spring first thinking that was my issue. Once I swapped to the German spring the failures to eject actually got waaay worse. Then I swapped out the ejector (but left in German spring)—after doing this all my problems vanished. I was just swapping one at a time. It still had the original silver spring in it when I swapped to the copper German spring. There is some chance that I swapped the spring needlessly but I had been meaning to swap over to the copper spring anyway.

Just so I'm 100% clear, your problem was actually the ejector lever? And you replaced it with a German ejector lever or a MKE ejector lever?

[The Dumb Gun Collector]

The problem was the ejector. I replaced it with one from to parts kit and it fixed the problem immediately.

[Ron3]

Thanks for update.

I might be at about 1k rds with mine at most. Been fine. 115 gr-158 gr.

[SteyrAUG]

The problem was the ejector. I replaced it with one from to parts kit and it fixed the problem immediately.

Thanks for the clarification. I'm gonna see if swapping it out with a German ejector and ejector spring works.

[Vegas]

I bought one of these in part due to this thread. Had some break in issues then got to about 500 rounds before putting it away while the F1 was pending. Got it back last week, Choate came in and I am off to the range today. This will get a bunch of rounds as it's so much fun to shoot so I'll be picking up one of these kits linked for the eventual day. Just need my Omega 9K to get sprung next