Sight pushers never worked for me; brass or aluminum dowel, or blade type screwdriver filed/ground to fit slide dovetail/sight base and a legit hammer always works.
A true "Gun Guy" (or gal) should have familiarity and a modicum of proficiency with most all firearms platforms.
https://www.midwayusa.com/product/1007109821?pid=884401
I've been using an older version of the above MGW sight tool, for slanted rear sights, for years now. It can also work with some straight-sided rear sights, too, but there's a similar model specifically for straight-sided Glock rear sights. I've had up to 10 Glocks at a time, so I've gotten my money's worth from this tool over the 20+ years of ownership.
I've got a few other rear sight tools, but don't recommend them: Glock's own brand, a discontinued version from Glockmeister, and a universal, probably discontinued B&J P500 sight tool.
On retrospect, even though I haven't tried one of these newer multi-brand/model versions, I'd consider the newer MGW tool:
https://www.midwayusa.com/product/1007109799?pid=874474
although I'd need to buy several slide adapters for the various brands and models of guns I own.
I bought this wheeler sight pusher about 6 months ago and it has worked great on both my glock 19's. I replaced both sight sets with some ameriglo's and it worked flawless. It's very easy to use and it's rather robust in construction so it appears it will last. I highly recommend it and it's not too expensive.
https://www.amazon.com/Wheeler-Engin...s%2C108&sr=8-3
"Si Vis Pacem Para Bellum"
Semper Paratus AR-15 Armorer
I read a review and bought the Real Avid Master Sight Pusher: https://www.realavid.com/product/master-sight-pusher/
So far I've used it to install Dawson fiber optic fronts and rears on a S&W M&P 2.0 and a RIA 1911 9mm. Worked good.
I use this for on the range adjustments, though: https://www.wyomingsightdrifter.com/...-sight-drifter
It works great, don't recall if it has been mentioned in this thread.
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
I'm outing myself as a cheap cuss, but I bought an NCStar VISM and it works fine for my needs (i.e., replacing Glock dovetail filler). The best part is, the tool is inexpensive enough that there are no worries with bringing it to the range for fine tuning windage.
"One can lead a child to knowledge, but one cannot make him think."
- Robert Heinlein
Bookmarks