Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Mounting muzzle device for can w/Tapered shoulder?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    4,010
    Feedback Score
    0

    Mounting muzzle device for can w/Tapered shoulder?

    I'd think this would apply to all rifles with a tapered shoulder behind the muzzle threads but I happen to be referring to a Mini-14 Tactical here. (5.56)

    It has a tapered shoulder, as opposed to the squared shoulder the .300 Blk model has.

    Will this interfere with a suppressor mount device? I've seen rings meant to fix just this issue if it's a problem. Do they?

    I'm considering a reduced back-pressure can, like the Huxwrx 556 Flow.

  2. #2
    Join Date
    Sep 2007
    Location
    AZ
    Posts
    32,717
    Feedback Score
    14 (100%)
    I use shims and they'll mash to fit the taper.
    "What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v

  3. #3
    Join Date
    Aug 2012
    Posts
    729
    Feedback Score
    21 (100%)
    Had a Ruger scout rifle with a tapered barrel with a surefire socom. Thought everything was fine until the first shot sent the can downrange. Turns out the taper interfered with the locking mechanism, despite everything looking perfect and in-spec.

    Ended up sending the rifle and can to surefire. they repaired the can and fabricated a washer to fit the taper.

    tldr: markm is without a doubt an SME and much more experienced than me but it doesn't hurt to triple check...


    eta: I did not know it was a tapered barrel until after the fact.

  4. #4
    Join Date
    Sep 2007
    Location
    AZ
    Posts
    32,717
    Feedback Score
    14 (100%)
    Now I'm assuming the small radius between the shoulder and the threads is what we're talking about. I'm no expert, but like I've said, my shims have always just formed to the shape.
    "What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v

  5. #5
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    4,010
    Feedback Score
    0
    Quote Originally Posted by markm View Post
    Now I'm assuming the small radius between the shoulder and the threads is what we're talking about. I'm no expert, but like I've said, my shims have always just formed to the shape.
    I heard you were an expert!

  6. #6
    Join Date
    Sep 2007
    Location
    AZ
    Posts
    32,717
    Feedback Score
    14 (100%)
    Quote Originally Posted by Ron3 View Post
    I heard you were an expert!
    I just make sure to eyeball the bore/endcap for relative concentricity before firing.
    "What would a $2,000 Geissele Super Duty do that a $500 PSA door buster on Black Friday couldn't do?" - Stopsign32v

  7. #7
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    4,010
    Feedback Score
    0
    Quote Originally Posted by markm View Post
    I use shims and they'll mash to fit the taper.
    Thanks!

  8. #8
    Join Date
    Aug 2017
    Location
    Lowcountry, SC.
    Posts
    6,057
    Feedback Score
    30 (100%)
    Can you post a picture of this taper?

  9. #9
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    4,010
    Feedback Score
    0
    Quote Originally Posted by 1168 View Post
    Can you post a picture of this taper?


    Not at this time. Ruger secured the FH well.

  10. #10
    Join Date
    Sep 2007
    Location
    Florida
    Posts
    4,010
    Feedback Score
    0
    Quote Originally Posted by 1168 View Post
    Can you post a picture of this taper?
    I did a search for a picture of the bare, factory muzzle threads on a Mini-14.

    Nope.

    I can find images of men & women doing supposedly erotic things with eels, balloons, and batteries, but nope, no bare Mini-14 factory muzzle thread pics.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •