Were there any instances of failure with the original optics cut?
Were there any instances of failure with the original optics cut?
“It's no wonder that truth is stranger than fiction. Fiction has to make sense.” Mark Twain
There is an ammo deal thru 12-15 if you pick one up.
https://waltherarms.com/blog/free-sierra-ammo
“It's no wonder that truth is stranger than fiction. Fiction has to make sense.” Mark Twain
Mine is an earlier 1.0 cut with a Holosun 509t and have had zero issues with it. It fits below the slide surface and buts into the cut, effectively making the slide a lug to absorb recoil forces.
My understanding is the 2.0 cut was slightly longer to accommodate longer optics (think ACRO?) although it did add a lug design. The only improvement the lug makes is to protect against side impacts. I cant see it absorbing linear stresses any better. But that's just my opinion.
Here is the link where Walther describes it:
https://waltherarms.com/blog/walther...nting-system-2
In any event, this is probably just academic. I believe they completely transitioned to the 2.0 cut some time ago. I would be surprised if any 1.0 cuts are still available other than the used market.
This is not my pistol and I'm not trying to make a sale. But the pictures are representative of how mine is set up. They illustrate how the optic and plate nestle inside the slide. I'd say pretty effective recoil lug. I put witness marks on the mounting screws. The "tray" on the left is the unique 509 mount and will loosen if you don't refresh the locktite when you remount after buying the taller sights later.
https://www.guns.com/firearms/handgu...used?p=1089404
Technically the PPQ started as a variant of the P99, one of their trigger options.
People liked it so much that they came out with it for the civilian market but meeting the German police specs of the P99Q and similar.
The big difference is the PPQ moved to a fully cocked striker. Dropped the cocking indicator (it's always cocked due to it's different striker design) and decocker which is no longer needed on an SAO.
I have a P99AS, PPQ M2, and PPQ M3.
The single action trigger on the AS is the lightest of the three, but you do have to deal with different take-up lengths. But it also has the very short reset of the PPQ.
For the PPQ's my M3 has a slightly better trigger than the M2, though they are very close and I think it's just a difference between individual pistols. (All mine are 9mm)
They all shoot great and I really notice the "nine Miles uphill through rocks" triggers on other pistols in that class.
If I found another M2 in 9mm for a decent price I would pick another one up.
Bookmarks