Tikka T3x Tac A1 question

[TACAV]

Im thinking that amount of deflection would be visually obvious if you know what you're looking at, and actually evaluating the setup.

Have you tried a different scope/sight?
Maybe throw something on there just to see if it points to anything.

I agree, time to send to/call tikka

Yes I used my Sig Tango 6 (4-18x) and my Nightforce SHV 4-14 in 3 different mounts. I actually sent the sig Tango 6 back to Sigs optics in Washington State so they could look at the zero stop on that one just to be sure so Im waiting to get that back.

If it comes back and im still getting the same issue after remounting it Im calling Tikka.

I've never had this problem before with a scoped precision rifle.

On the precision rifle side, I have a decent amount of experience with a Gen 2 Ruger Precision Rifle, a Rem 700 LTR, a Bergara B14 HMR and a Sig 716 DMR Gen 2. All good experiences. The Remington is by far the crappiest rifle regarding the factory trigger (and the general limitations of the platform) but its still a tack driver.

[Coal Dragger]

Sell all of them and buy an AI. Problem solved.

[TACAV]

.....

[TACAV]

Problem solved.

The keymo suppressor mount was misaligned when the gunsmith put it on. Not enough to cause a baffle or endcap strike but enough to cause the problems I was getting. Got it fixed. Took it to the range today. Everything shot great with the suppressor.

[Coal Dragger]

Sweet!

[georgeib]

Thanks for the update. Glad you got it worked out.