AR Pistol

[Wulf50guy]

Well since this is the AR pistol forum I figured I'd throw this in here.
Just got through building it a few days ago. SBR's are hard to get signed for around here so I went with another pistol.
A fun little range toy nothing serious, not my go to gun or anything just something fun to play with.
I wanted to do something a little different this time, I had a 7-1/2 before and it was ok.
I decided to go with a 10.5 this time. Removed the FSB and replaced it with a low profile block (which wasn't quite low profile enough, had to do a litte finessing to get it to fit), a Samson MRFX-MX midlength rail, and I decided to try one of those levang compensators this time to see what it does.Got a pistol buffer kit from RB Precision.I went with the S.P.O.T. since I wanted a red dot for it. With YHM flip sights fron and rear.
Haven't gotten to shoot it yet but hopefully this weekend.
Well here it is.


And a pic from the muzzle end,

[GETSUM]

NICE -----


HERE is mine --



also - If interested in recoil at all


http://media.putfile.com/AR-PISTOL--cycling"]http://media.putfile.com/AR-PISTOL--cycling[/COLOR]
















-

[6921SOCOM]

I've toyed with getting AR pistol for over a year now, but keep hearing about reliability problems. Anyone out there have one thats put lets say several hundred / 1,000 rounds thru theirs without problems?

Not to ding the projects above, they look nice, and if they are reliable, Im jealous.

[eklikewhoa]

so is this a picture thread?

here's mine just in case

[Kyrinn]

Her name is Nyx.



* LAR lower (branded Spike's Tactical Pistol)
* Unknown LPK (the trigger was terrible until I took a stone to it, now it is almost a two-stage)
* Ban-era pinned stock that was Dremelled
* Carbine buffer and buffer spring
* First Samco G27 Pistol Grip (love 'em)
* Ambi, Single point sling end plate
* Colt A3 Upper
* Free Float HG
* DPMS Phospated BC Assembly
* CMMG MedCon 7.3", 1:7" twist bbl.
* Three-prong FH

[QUICK+V]

I use the Noveske Diplomat 7.5" + Krink on a mega lower. I use Cproducts SS mags.

First range outing was 230 rounds of xm193. all 6 mags wouldntloci back the bolt or lock it back at the carrier/ not far enough to strip a round. The Brownells magazine I had had significantly more spring tension than the C products so I replaced the C products springs with Wolf XP mag springs. BUT actually the real problem is the Enidine Buffer. In a static system where the weapon is shouldered that buffer might compress , but the stockless pistol wont allow it. Pulling back the charging handle the force required to compress the buffers hydraulics is maybe 4 times the force of just the Tubbs CS action spring.

So I ordered an H3 buffer from GandR today.

Other than that fed flawlessly. My Eotech 552 ran out of elevation (down) sent it back and they sent me a new one that works.


for Irons U use 2 pri front flip ups ....a XS big dot for the front and the rear is a KNS duplex aperture which is mounted just past the barrel nut so I can focus on the duplex if I need to. this set up is like the "Eotech " of Irons. Like a Spider Web MG sight.

[PolarBearBait]

My new pistol build [^]



Predator P-4X
Oly 6.5" Barrel
Essential Arms OD Green Lower Receiver
Essential Arms OD Green A3 Upper Receiver
Essential Arms OD Green Upper Parts Kit
DPMS lower parts kit
Ace Pistol Buffer Assembly
Noveske KX3 Piggy Brake w/ Flaming Pig
Magpul Industries MIAD Modular Pistol Grip

David

[Gibbles]

Can I play too?



LAR Grizzly Pistol Marked Lower
RRA Parts Kit
CMT T marked upper
CMT AR-15 carrier
DPMS Levang brake
Hogue Grip
M1S 7.5in barrel with M1S FF tube
M1S Pistol buffer tube
M1s standard pistol gas tube

It functions flawless and eats everything, even wolf