|
||||||||||||||||||||||||||||||||||||||
However I now have a Novak rail - it fits the same height as a normal railed frame gun. The Dawson while slick - does require a different holster, as it sits lower.
Kevin S. Boland
Manager, Federal Sales
FN America, LLC
Office: 703.288.3500 x181 | Mobile: 407-451-4544 | Fax: 703.288.4505
www.fnhusa.com
Sorry I replaced two 1911's that had Dawsons.
I have a Dawson and Novak rail at home, I will check it out.
Kevin S. Boland
Manager, Federal Sales
FN America, LLC
Office: 703.288.3500 x181 | Mobile: 407-451-4544 | Fax: 703.288.4505
www.fnhusa.com
KevinB,
You wouldn't happen to have a Beretta 92 at the house would you? I'd be interested in how that Novak rail sits on the 92's dust cover. The Brownells rail says it works on both, but is higher and over all not to my liking. Any how might end up with it on both my 1911 and 92 if the contor is right.
pro-patria.us
I got rid of my Berretta in 93![]()
Kevin S. Boland
Manager, Federal Sales
FN America, LLC
Office: 703.288.3500 x181 | Mobile: 407-451-4544 | Fax: 703.288.4505
www.fnhusa.com
rub it in.
pro-patria.us
I'll see if I can find a Berretta at work next week to take a pic on.
Kevin S. Boland
Manager, Federal Sales
FN America, LLC
Office: 703.288.3500 x181 | Mobile: 407-451-4544 | Fax: 703.288.4505
www.fnhusa.com
If you mount a rail to an aluminum frame you need to make sure you either 1) know what you are doing or 2) have a gunsmith who is qualified mount it. Aluminum will give under heavy use in regards to the screws. Dawson Precision has discontinued their rail for the Beretta and SIG non-rail frames for this very reason.
הבן שלי של מגן
My Son's Protector
citadelshooter
Bookmarks