WTS: HSGI Moose pack MULTICAM

[BrianB]

I don't need or use this since I got my Tri-Zip pack.

$150+$10 for shipping

USPS Money order prefered, no pay-pal, no trades

e-mail contact is fastest.

info from HSGI web site:

(3 piece system , combined total of 1,656 cubic inches)******* 4.5" T x 12" W x 20" H , approx. 1,080 cubic inches . 1- large mesh pocket on interior flap. 2 -small mesh pocket on top of large mesh pocket . As well as 2 rows of PALS above the mesh pockets . Elastic loops within to secure chem-lights ...etc....on top of the 2 small mesh pockets . 3 -ports for hydration tube and communication needs , w/loop velcro for patches . 3 columns x 7 rows of PALS webbing on sides . 3 columns x 4 rows of PALS on bottom . 8 columns x 9 rows of PALS webbing on backside . Internal hydration pouch with suspension loops . Pals webbing applied to the inside on top of the hydration pouch . 7 Rows x 8 columns to attach other MOLLE pouches or to secure radio equipment too . Loop velcro on top of main flap for patches . 3" wide , 6.5mm neoprene sharks tooth textured non-slip contoured shoulder straps with 5 rows x 2 columns of PALS webbing . Adjustable load straps ( between pack to shoulder straps) . Adjustable sternum strap . Shoulder straps are attached wider at neck for better comfort when wearing body armor . Fully HD #10 zippered opening of main compartment flap . Closed cell foam covered with 1000 denier next to back for back comfort and to insulate against the hydration bladder . Frame board can be used within (not supplied) . 2 - 1/4" drain holes . Carrying handle .******* Includes : 1 - HSGI's Modular Combination V-2 Ultility pouch . Measures : 9" H x 8.5" W x 4" T approx. 306 cubic inches . 3 Internal pockets w/elastic tension that will fit 2 M-4 mags each . 6 columns x 4 rows of PALS webbing . HD #10 zippered opening . 2 1/4" drain holes .******* 1 - HSGI's Modular Hydration Carrier . Able to carry 2/3liter hydration bladders Measures : 18" H x 10" W x 1.5" T approx. 270 cubic inches 7 columns x 8 rows of PALS webbing on both front and back . HD #10 zippered opening. 2 - 1/4" drain holes . Carrying handle . Secures to pack by 6 - 1" side release buckles . ******** All constructed out of 1000 denier cordura nylon , sewn with #138 bonded nylon threads . Bar-tacked with #69 bonded nylon thread . Has HSGI's Lifetime Warranty

[BrianB]

MMmmmmmm Multicam