My CapnCrunch inspired build

**BravoCompanyUSA** · 07-03-06, 17:15

Tally built up a real nice shorty on one of our BCM 11.5" prototypes, and I thought I would try out that set up.

Pictured above is his set up with a KAC 10" FF RAS and S&B Short Dot.

This is still very much a work in process. . . .
I am saving up for a Short Dot, so I thought I would try a similar set up to see how I liked it.

One thing I noticed was the "feel" of this light weight shorty was even lighter with the small low pro gas block in place of the standard FSB. I have a DD 9.0 on the shelf, and a Accupoint in a LT mount in the safe (a poor mans Short Dot

)
The Troy sights fit under the optic with room to spare. I have some custom made 10" DD rails in the works, so when they are ready I will probably remove the 9" and install a 10". Then I won't need to trim the bottom TD panel.
Most of my personal set ups have the original taper pinned OEM forged FSB, but I plan on pinning the low pro gas block (it probably won't be pretty), but really solid.
If the adaptors for the SF Supressors fit, this has the potential of being my favorate shorty.

**ArchAngel** · 07-03-06, 17:39

Nice!

Send mine in OD.

**M4arc** · 07-03-06, 17:57

That's sweet!

**CapnCrunch** · 07-03-06, 18:21

I'd run the living piss out of that. That is one sweet upper. With the 9.0 you definately have enough room for the FA556K. I'll have to wait until I get the FH's until we know for sure about the 10".