
Originally Posted by
rman43
About the middle of August, I bought an M4 upper through Midway USA. I put it on an RRA lower and made a couple of trips to the range. The gun would only function as a single shot. It would feed a round from the magazine, fire, eject and feed another round, but would not fire the second round. For some reason, the action was not recocking. Also when I pulled the bolt back with no magazine in the gun, the bolt would not return to battery without pressing the forward assist a couple of times. I sent TacSol an email and they suggested that I box up the whole gun and send it to them. They offered to pay shipping both ways. I sent it off on 9/9 and UPS tried to deliver it on 9/25. I wasn't home, but they made another delivery attempt on 9/28. There was no note in the gun case regarding the work that was done. The first thing I noticed was that the bolt no longer stayed open when no mag was in place. I pulled the bolt out and it appeared that they had done some polishing on the under side of the bolt and added a metal spacer/washer at the rear end of the recoil spring.
I made it to the range last night to try it out. I can only shoot from 25 yards at the indoor range, so I didn't really try very hard for accuracy. The shooting benches are narrow and too high and the 30 round magazine gets in the way. That makes it pretty hard for me to bench rest a rifle. I shot some Wally World Federal bulk 36 gr, and some Federal Auto Match 40 gr stuff through it. The Auto Match was definitely more accurate and both functioned flawlessly. I shot 100 rounds of the bulk ammo and 50 rounds of the auto match. This thing is a whole bunch of fun!
My hat is off Tactical Solutions. They changed this thing from a single shot to a shooting machine! Customer service like this is hard to come by - I'd say theirs is second to none!
Bookmarks