Under $200 2-7x scope

[carbinero]

It is for my son's first AR, and I have more kids getting older. So I'd like decent quality without breaking the bank. They can decide later if they want to pony up for better glass. Now that the gratuitous disclosure is over...

I'm guessing the 2-7x mag range is a good compromise for a new shooter/hunter, considering the price range. I'm looking most closely at a Weaver Classic-V or a Burris Fullfield, although I'm not keen on turning the whole eyepiece to adjust mag on the Burris.

Any opinions on which of these two would be better, or another I've overlooked? No Chinese manufacturing...

[PlatoCATM]

Have you checked out the Leupold Rifleman? I have a limited experience with magnified optics, but the model I have, which happens to be the 2-7x, is more than serviceable. Retail is below $200 if you shop around.

[Pi3]

http://www.arcadian-sales.com/Mercha...&Store_Code=AS

Nikon prostaff $119 is the cheapest I would go. I like Leupold.

http://www.madogre.com/Interviews/Rifle_Scopes.htm

[VortexSam]

We have a Diamondback 2-7x35 that is $179 and it is made in the Philippines.

http://www.vortexoptics.com/product/...v-plex-reticle

And it's backed up by our lifetime, fully transferable, no-fault, VIP warranty:

http://www.vortexoptics.com/content/vip_warranty

-Sam

[carbinero]

The link says this:

•2-7x35 Rimfire is designed for close range use on 22 rimfire, shotguns, and muzzleloaders.

However it also says this: "...solid one-piece aircraft-grade aluminum alloy construction makes the Diamondback riflescope virtually indestructible and highly resistant to magnum recoil."

The "rimfire" gives me pause, since .223 is the lowest power this glass will ride on. I assume your 2-7x35 scope is the same as the 2-7x35 Rimfire, except the Rimfire version is not available with the BDC reticle... Is that correct?

[VortexSam]

The link says this:

•2-7x35 Rimfire is designed for close range use on 22 rimfire, shotguns, and muzzleloaders.

However it also says this: "...solid one-piece aircraft-grade aluminum alloy construction makes the Diamondback riflescope virtually indestructible and highly resistant to magnum recoil."

The "rimfire" gives me pause, since .223 is the lowest power this glass will ride on. I assume your 2-7x35 scope is the same as the 2-7x35 Rimfire, except the Rimfire version is not available with the BDC reticle... Is that correct?

Something isn't quite right with the website. I'll make sure to have that changed tomorrow.

The only difference between the rimfire and the standard 2-7x35 is that the rimfire version only comes with the V-plex and the parrallax is preset to 50 yards.

The standard 2-7x35 comes with either the V-plex or the Dead-Hold BDC reticle and has the parallax set to 100 yards.

Both scopes are made to handle magnum recoil, so it will serve just fine on a .223 and up.

Sorry for the confusion.

-Sam

[carbinero]

Thanks. Looks like a strong contender, especially with the BDC option for only $10 more.

[jtb1967]

The Bushnell Elite 3200 would be my pick in your price range. They're great scopes.

[carbinero]

Is this interesting for my price range, or just stupid?

http://www.valhallaarmory.com/2_7x32..._p/st27x32.htm

I haven't heard of Valhalla; it's also listed as Centurion Tactical.

Back to normal scopes...I'm leaning toward the Weaver V7, since it's $50 less than the others, and I can apply the difference toward an SPR-E. Right now, I'm using a Leapers... I like the idea of supporting Vortex, but I read the comparably priced Crossfire model is Chinese.

I've not heard a discouraging word about the Weaver. Anyone?

That madogre essay was great. Can't believe I hadn't seen it before.

[VortexSam]

Is this interesting for my price range, or just stupid?

http://www.valhallaarmory.com/2_7x32..._p/st27x32.htm

I haven't heard of Valhalla; it's also listed as Centurion Tactical.

Back to normal scopes...I'm leaning toward the Weaver V7, since it's $50 less than the others, and I can apply the difference toward an SPR-E. Right now, I'm using a Leapers... I like the idea of supporting Vortex, but I read the comparably priced Crossfire model is Chinese.

I've not heard a discouraging word about the Weaver. Anyone?

That madogre essay was great. Can't believe I hadn't seen it before.

Our Crossfire series are the only riflescopes that we have that are made in China. They are made there to hit a certain price point. The comparable 2-7x32 Crossfire is $110, so it's a little less than the Diamondback 2-7x35.

All our other riflescopes are made in the Philippines or Japan.

For what it's worth, we are a US Veteran owned and operated company.

Thanks for considering us and let me know if you have any other questions about our product.

-Sam