Thanks guys, did that myself. Kinda nervous first experience with a milling machine but came out great.
Thanks guys, did that myself. Kinda nervous first experience with a milling machine but came out great.
http://www.hkparts.net/shop/pc/viewP...&idcategory=12
Didn't use the o-ring, made a spacer to go between the rail and the loop. Two washers would have done it but I ended up cutting down a nut so the sides would fit into the rail slot better and it would be the exact height needed.
Thanks man.
Any issues with rotation? I'd like to bolt one through the slot on my MOE handguards but am concerned that it would twist/rotate and/or slide back and forth on the rail.
Really looking for exactly that but with two connection points so that at least it can't twist.
kdcgrohl,
I'm way out of touch w/ these...
What WAS the conversion that was milled/ performed?
Awesome USC BTW..!
Eric!
Last edited by erh; 08-03-09 at 12:16.
-E!-
The hooks on the lower have to be milled, the upper's magwell area has to be milled to match the new lower and the 5 slots/vents are cut into the front of the upper receiver. And of course the new barrel and stock and all the other goodies.
Thanks. Didn't know if you guys would appreciate the USC/UMP or not, but its a ton of fun to shoot.
the_accuser, what brand and model Can is that on your LMT MRP ?
Last edited by Lawdog-1; 08-03-09 at 22:36.
Bookmarks