Will this setup be alright? I plan on running a PWS FSC556 on the front end. Will I have any problems?
Will this setup be alright? I plan on running a PWS FSC556 on the front end. Will I have any problems?
"Buy once, cry once. Or not. Many of you will undoubtedly be zombies one day. I'd prefer if you were zombies with sub-par gear."
I'm not anywhere near my rifle right now but I seem to remember my 12" Lite Rail runs about 12.5". I had a 14 on a 14.5" LMT upper and it was pretty damned close to the flash hider. As long as you don't get your mitts too far forward they shouldn't catch much blast. My 14" rail looked like this
thanks. i think mine will end up about the same.
"Buy once, cry once. Or not. Many of you will undoubtedly be zombies one day. I'd prefer if you were zombies with sub-par gear."
should work as long as you don't plan on using a can.
The DD 12" rail runs more like 12.3". Mine ended up looking like this on the 12.5" barrel.
I decided to have mine cut like in the following image to have more access to the brake and help minimize muzzle blast on the rail.
*Photos by Paul B. from Bravo Company. Used with his permission.*
Last edited by Dozer; 03-25-10 at 12:04.
Product Manager at Magpul Industries
This is a personal account linked to a personal e-mail. Company affiliation and titles are provided purely for transparency requirements of the host site. Although factual company information may be shared through this account, any opinions expressed are solely those of the account holder, and not necessarily those of Magpul Industries or subsidiaries.
so obviously as stated earlier i won't be able to run a can. wonder if i should just use a Lite 10 rail?
"Buy once, cry once. Or not. Many of you will undoubtedly be zombies one day. I'd prefer if you were zombies with sub-par gear."
That threw me for a loop there Dozer, that's a Kino type setup yeah? The FSPM had me a little confused for a second.
Anyway Rated21R, I think 10 would be plenty for your setup. A touch cheaper and it'll let you run a can if you want. I sure wish I lived in a free state so I could use one.
It's a Kino. The 10" is a great choice.
Product Manager at Magpul Industries
This is a personal account linked to a personal e-mail. Company affiliation and titles are provided purely for transparency requirements of the host site. Although factual company information may be shared through this account, any opinions expressed are solely those of the account holder, and not necessarily those of Magpul Industries or subsidiaries.
Bookmarks