Page 1 of 4 123 ... LastLast
Results 1 to 10 of 31

Thread: Onerous VA safety inspection

  1. #1
    Join Date
    Nov 2007
    Location
    VA
    Posts
    7,469
    Feedback Score
    12 (100%)

    Onerous VA safety inspection

    OK, my truck that is fine working order (some of you have ridden in it) just got failed for VA safety inspection because of "loose" ball joints, moisture in one fog light and headlight, low rear brake pads, and a BB sized hole in a turn signal.

    I'll replace the pads myself, see about the moisture in the headlights, and put some orange tape or something in the turn signal lens but am I crazy in thinking that this is BS? The truck drives fine, it's in good shape.

  2. #2
    Join Date
    Nov 2007
    Location
    Utah
    Posts
    8,685
    Feedback Score
    4 (100%)
    The inspector has too much time on his hands.

    Interesting they actually check the brake pads. out here they run you on a test pad and specifically warn you that they are not checking the pads thickness and you should have it checked by a mechanic... As long as you pass the test pad you are fine.
    • formerly known as "eguns-com"
    • M4Carbine required notice/disclaimer: I run eguns.com
    •eguns.com has not been actively promoted in a long time though I still do Dillon special
    orders, etc. and I have random left over inventory.
    •"eguns.com" domain name for sale (not the webstore). Serious enquiries only.

  3. #3
    Join Date
    Oct 2007
    Location
    NW Florida
    Posts
    2,553
    Feedback Score
    41 (98%)
    It's for your safety, sir.



  4. #4
    Join Date
    Apr 2009
    Location
    VA
    Posts
    245
    Feedback Score
    4 (100%)
    Did you go to a chain place to get it done?

    I've had much better luck with local privately owned shops when getting inspections done.
    _____________________________
    We don't come alone; we are fire, we are stone.

  5. #5
    Join Date
    Mar 2008
    Location
    Fredericksburg, VA
    Posts
    4,858
    Feedback Score
    7 (100%)
    Quote Originally Posted by Littlelebowski View Post
    moisture in one fog light and headlight, .
    You're almost out of light fluid, send a PFC to the mechs for more.

    Then send him to the Co. Gunny to ask where he can find the PRC-E7.
    Contractor scum, AAV

  6. #6
    Join Date
    Jun 2006
    Location
    Niantic CT
    Posts
    1,964
    Feedback Score
    6 (100%)
    Quote Originally Posted by Riverine View Post
    You're almost out of light fluid, send a PFC to the mechs for more.

    Then send him to the Co. Gunny to ask where he can find the PRC-E7.
    Then have the PRC-E7 checked with the anal protrusion gauge and record the findings on the blue status grid paper.

  7. #7
    Join Date
    May 2008
    Location
    Colorado
    Posts
    13,142
    Feedback Score
    0
    Quote Originally Posted by Littlelebowski View Post
    moisture in one fog light and headlight
    Hello, when I turn it on the water turns to fog.

    DO you have to have fog lights?

    You didn't tip enough.

  8. #8
    Join Date
    Jul 2006
    Posts
    4,922
    Feedback Score
    4 (100%)
    Do not take it back to that shop.
    My brother saw Deliverance and bought a Bow. I saw Deliverance and bought an AR-15.

  9. #9
    Join Date
    Nov 2007
    Location
    VA
    Posts
    7,469
    Feedback Score
    12 (100%)
    Quote Originally Posted by FromMyColdDeadHand View Post
    Hello, when I turn it on the water turns to fog.

    DO you have to have fog lights?

    You didn't tip enough.
    That's what I asked and they told me any light on the vehicle has to be in good working shape. Other guys are telling me from experience that it may not pass even with colored tape on the turn signal.

    This is seriously worse than California. California was a breeze with common sense applied to the inspection. I polished the front headlights, installed super powerful bulbs, taped the hole, and will do the brakes this weekend. This is giving the inspection shops free license to run wild with their fees. If I catch any more hell over the fog light, I'll pull the damned things.

  10. #10
    Join Date
    Nov 2007
    Location
    VA
    Posts
    7,469
    Feedback Score
    12 (100%)
    Quote Originally Posted by Heavy Metal View Post
    Do not take it back to that shop.
    I asked around and got references for shops that aren't run by shyster/Nazis.

    I hada very hard time keeping my mouth shut when paying for the emissions test and safety inspection.

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •