Thats a little more wear,particularly on the side of the pin,than I would expect to see with only 800 rounds.Also looks like there is burnishing at the upper and lower surface of the pin post from the bolt,as if the cam pin is loose fit in the bolt and rocking.I'd personally replace it with a LMT or BCM cam pin and run it wet with a good lube....I prefer Weapon Shield CLP and it works.
I also use a small chrome plated screw driver to scribe an arrow(leaves a black arrow) on top of the cam pin to ensure it is installed in the same direction every time.This seems to keep a consistent wear pattern on the cam pin.
Personally for five bucks I replace the cam pin when I feel the need no matter the round count.If it looks unusual I toss the old and in with a new.
Last edited by Blankwaffe; 03-20-10 at 03:08.
Glock Certified Armorer
Armed Protective Services II
Bookmarks