New M4Carbine Hats

[VA_Dinger]

Just proofcheck the spelling.

Inside joke.

[rhino]

I put the velcro towards the end and measured the inside of the hat. It will fit a head diameter of at least 24.5 inches.
C4

My head is a little over 25 inches in circumference, which is usually an 8 to 8-1/4, depending on the hat shape.

[C4IGrant]

My head is a little over 25 inches in circumference, which is usually an 8 to 8-1/4, depending on the hat shape.

Good Lord son, that is a big melon!!



C4

[conspiro agnew]

Sorry for the brief hijack, but I was thinking a M4C sticker would be cool for our vehicles. The typical white oval with black lettering like people do with places, states, countries and such. Kind of overdone, but most people wouldn't get that one.

As far as the hat, I like it, but the lettering is a little too dominant in my opinion. That, and I, like Rob, don't like buttons on the tops of hats.

[SigFanWA]

Well since your asking for opinions....I think it deviates too much from the original logo mark. Font looks like serpentine bold oblique.... your looks like serpentine condensed. I would stick with the original design.... even if you have to reduce logo mark it in size

back of hat looks great!

[Jay Cunningham]

My head is a little over 25 inches in circumference, which is usually an 8 to 8-1/4, depending on the hat shape.

He's got a head like Sputnik!

[C4IGrant]

Sorry for the brief hijack, but I was thinking a M4C sticker would be cool for our vehicles. The typical white oval with black lettering like people do with places, states, countries and such. Kind of overdone, but most people wouldn't get that one.

As far as the hat, I like it, but the lettering is a little too dominant in my opinion. That, and I, like Rob, don't like buttons on the tops of hats.

Thanks for the idea.

C4

[conspiro agnew]

Thanks for the idea.

C4

Gladly, and it sure would fit nice next to my NRA and SIG stickers.

[Nathan_Bell]

I'm another dude with a big noggin. I think I and dkc4u are wondering if the hat will be deep enough and large enough around so that we aren't relying on the very ends of the velcro straps to stay together and then the hat doesn't sit well on the head. Could you measure around the circumference with the velcro placed as you have it pictured? My fitted hat size is a New Era 7 5/8. Sorry for the bother but really want to represent well. I would pay more for a flex fit in XL.

Creighton

If this is the same hat "chassis", if that is the correct term, as the Vickers hat, it should fit. I wear a 7 5/8 and my Vickers hat fits great, it has about 1 1/2" of velcro overlap in the back.


Side bar:

See Grant! There are folks out there with melons as big as mine!

[C4IGrant]

If this is the same hat "chassis", if that is the correct term, as the Vickers hat, it should fit. I wear a 7 5/8 and my Vickers hat fits great, it has about 1 1/2" of velcro overlap in the back.


Side bar:

See Grant! There are folks out there with melons as big as mine!

Apparently bigger as you have a HUGE MELON.


C4