Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: AR Technical Discussion FAQ/Knowledge Base Threads

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2006
    Location
    NoVA
    Posts
    5,963
    Feedback Score
    12 (100%)

  2. #2
    Join Date
    Aug 2007
    Posts
    297
    Feedback Score
    1 (75%)

    Thanks

    Thanks for putting all this information into one place. I am sure it will help many newbies like me from asking repeative questions.

  3. #3
    Join Date
    Jun 2006
    Posts
    113
    Feedback Score
    19 (100%)
    Thanks alot SHIVAN...

  4. #4
    Join Date
    Feb 2007
    Posts
    76
    Feedback Score
    0
    it would be nice to have photographs to go with some of the upper forge marks.

  5. #5
    Join Date
    Feb 2008
    Posts
    493
    Feedback Score
    0
    Quote Originally Posted by carbean View Post
    it would be nice to have photographs to go with some of the upper forge marks.
    i second that request.

  6. #6
    Join Date
    Aug 2008
    Location
    Somewhere
    Posts
    818
    Feedback Score
    5 (100%)
    Wow...what a ton of good knowledge in here!!! Fantastic thread.

  7. #7
    Join Date
    Oct 2010
    Location
    United States of America
    Posts
    157
    Feedback Score
    2 (100%)
    Thanks for the info.
    If you're in range, so are they...

  8. #8
    Join Date
    Jul 2012
    Posts
    4
    Feedback Score
    0

    old oly

    I have a well used oly arms and not a gun smith. Im getting two round bursts alot more than safe and fun for semi at the range was looking for advise to remedy this problem? New trigger? New spring? Tools? Thanks for your advice.

  9. #9
    Join Date
    Dec 2010
    Location
    Chicago, IL
    Posts
    249
    Feedback Score
    0
    Quote Originally Posted by oly85 View Post
    I have a well used oly arms and not a gun smith. Im getting two round bursts alot more than safe and fun for semi at the range was looking for advise to remedy this problem? New trigger? New spring? Tools? Thanks for your advice.
    Could be the disconnector timing, could be a disconnector spring, could be a worn sear, could be some gunk or debris collected in the lower.

    Perform a function check, Charge the handle, make safe then attempt to fire, your AR should not fire. Select the fire, pull trigger weapon slowly to feel the trigger, and it should fire. Don't release the trigger, charge the AR again and release the trigger. You should experience a reset, not a fire. Wash rinse repeat.


    Detail strip the lower clean thoroughly and reassemble. If it still happens take to a gunsmith or buy a new "lower parts kit" and rebuild the lower. While the lower parts kit is over kill and not all parts will be used (like pistol grip and pivot pin and mag release etc... ) these are nice parts to have on fan for what ever. The LPK will no doubt fix your problem, but gunsmith may be able to retime the disconnector if that is the problem.
    Last edited by AlphaKoncepts; 08-14-12 at 00:14. Reason: typos
    -Thomas

    Member, ISRA; Life Member, NRA; USCCA Certified Instructor; NRA Certified Instructor, AGI Certified Gunsmith, Illinois Concealed Carry Instructor
    www.alphakoncepts.com www.gunrights4illinois.com

  10. #10
    Join Date
    Jul 2012
    Posts
    4
    Feedback Score
    0
    thanks CGS oly has a kit for 70$ with out the stock or p grip is there a better deal that fits my ar that you reccomend.What about tools?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •