ADJ Gas Block For a AR-10

[Todd.K]

Or better yet, when are you going to make a 7.62 switchblock?

For what 7.62 AR?
What gas system length?
What buffer and spring should it be set for?
Should it be set to run optimally with good 308 or overgassed to run crap third world surplus?

No easy answers when dealing with the 7.62 AR.

[BBB]

No easy answers when dealing with the 7.62 AR.

No, there's not. That's why I am willing to tinker with it. I understand the lack of standards across brands makes any turn-key system like this difficult to R&D. To bad it cant be made as simple as re-jetting my dirt bike! Are the ports in the gas tube itself, so it rotates a specific port into alignment with the barrel port?

[Todd.K]

The gas tube and a drum rotate with the switch. The secondary port in in the drum.

[Todd.K]

Uppers and rifles are still on the table pending more testing but I don't expect we would release a separate Switchblock for the reasons above.

[redtazdog]

.

[11B101ABN]

Did I not read somewhere that the gasblock on that rifle was a one off?

Care to elaborate?

Thx.

[redtazdog]

Did I not read somewhere that the gasblock on that rifle was a one off?

Care to elaborate?

Thx.

It is a one off because Noveske wouldnt hurry up and make me a
SwitchBlock