3.5lb connectors for Glocks

[poirierpro]

I know its just a piece of stamped polished metal but there are so many companies making these connectors now! Which ones are good and which ones should I stay away from?

[M4arc]

I know its just a piece of stamped polished metal but there are so many companies making these connectors now! Which ones are good and which ones should I stay away from?

Personally I'd stick with the Glock OEM connectors. Smittywee on ebay sells them for $16 each. Although plenty guys here have success with some of the others I prefer to stick with OEM.

[Palmguy]

Personally I'd stick with the Glock OEM connectors. Smittywee on ebay sells them for $16 each. Although plenty guys here have success with some of the others I prefer to stick with OEM.

I agree.

I've got one LWD 3.5 in my spare parts box, I prefer the feel of the Glock part. I see no reason to go elsewhere (even considering the limited availability of the Glock part).

[Cosmo M3]

Ghost

[NavyDavy55]

I too would stick with the OEM connector from Glock.

Thier price is right and they work fine.

IMHO, No gain from any after market connector.

[LSK]

Stick with Glock OEM parts. I used an after market connector once. When I had to replace a broken firing pin the pistol turned into a full auto. I put the Glock OEM connector back and the pistol went back to semi auto.

[platoonDaddy]

Personally I'd stick with the Glock OEM connectors. Smittywee on ebay sells them for $16 each. Although plenty guys here have success with some of the others I prefer to stick with OEM.

Their add states they are factory Glock OEM 3.5#lbs and then state:

The Scherer Trigger Connector reduces trigger pull on any GLOCK® to approximately 3.5 pounds. These connectors are manufactured as close to OEM dimensions as possible except for sear angle. Additionally, each connector is coated with Robar NP3.

http://cgi.ebay.com/FACTORY-GLOCK-OE...item4aa9cadd21


Is it OEM or aftermarket?

[boshev]

Both LWD 3.5 and Glock OEM

[dsg2003gt]

Their add states they are factory Glock OEM 3.5#lbs and then state:

The Scherer Trigger Connector reduces trigger pull on any GLOCK® to approximately 3.5 pounds. These connectors are manufactured as close to OEM dimensions as possible except for sear angle. Additionally, each connector is coated with Robar NP3.

http://cgi.ebay.com/FACTORY-GLOCK-OE...item4aa9cadd21


Is it OEM or aftermarket?

i dont see that anywhere in that listing. the listing is for glock connectors - oem.

[M4arc]

Their add states they are factory Glock OEM 3.5#lbs and then state:

The Scherer Trigger Connector reduces trigger pull on any GLOCK® to approximately 3.5 pounds. These connectors are manufactured as close to OEM dimensions as possible except for sear angle. Additionally, each connector is coated with Robar NP3.

http://cgi.ebay.com/FACTORY-GLOCK-OE...item4aa9cadd21


Is it OEM or aftermarket?

Sorry dude, I don't see any mention of Scherer connectors in the link to the auction. Smitty is a stand up guy so while he may sell both that auction is for OEM connectors and that's what you'll get.

I've ordered from him probably 8-10 times and every single time I got exactly what I ordered.