|
||||||||||||||||||||||||||||||||||||||
Member
Just had my smith install the Ram(Reset assist mechanism) On my M&P9 This rather inexpensive and simple device gives my pistol a posative trigger reset. This was the main complaint for me on the M&Ps and now its tons better. This is not a product review but if your looking to get a sharp reset for your M&P check it out.
Last edited by Guns-up.50; 04-02-11 at 20:43.
"Courage is being scared to death ,but saddling up anyways" John wayne
NO BETTER FRIEND NO WORSE ENEMY
Member
I'd like to get rid of the mile long takeup on my APEX'd M&P.
...
Member
Apex is working on something that might help.Originally Posted by number9xd
Member
Is there any word on when and what it will be? I installed my Apex hard sear and USB and it made the trigger pull smooth and crisp but........ the pre-travel is unacceptable. As of now I'm thinking I might reinstall the original hard sear and just keep the Apex USB in until something can be done about the super long pre-travel characteristics of the trigger.
The matter of the pre-travel has become more irritating to me recently because I got a .40c model to complement the .40FS with the Apex parts in I mentioned above. The c model has a stock trigger and there is very little pre-travel before the trigger breaks.
Member
"The 1911 was the design given by God to us through John M. Browning that represents the epitome of what a killing tool needs to be. It was true in 1911 and is true now."—Colonel Robert J. Coates, USMC
Member
Still waiting for the RAM for the .45 with thumb safety
Senior Member
**This kit is recommended for competition use only**
This kit comes complete with everything you need to upgrade your M&P to reduce pretravel, over travel and set the trigger pull to a smooth 4lbs.
Uh, no thanks.
Member
I've seen this product and it is very interesting. But I was hoping for something to fix the long pre-travel on my existing Apex hardsear upgraded pistol without having to buy another whole trigger set.
Senior Member
I put a couple hundred rounds on mine today, install was a breeze. In my slow fire strings it made a huge difference in being able to prep my trigger properly. I still managed to outrun my trigger during controlled pairs though. Toward the end of my session I was starting to figure it out but my second shots were still slower than my G19 with a NY1 and - disconnector. I need more dryfire practice for sure.
Member
Then wait for the ~5 pound duty spring.
Posting Permissions
Reply With Quote
Bookmarks