Page 1 of 15 12311 ... LastLast
Results 1 to 10 of 143

Thread: G19 Upgrades

  1. #1
    Join Date
    Nov 2010
    Location
    Cookeville, TN
    Posts
    43
    Feedback Score
    1 (100%)

    G19 Upgrades

    I just got some Heinie Straight Eight Night Sights and a 3.5# Connector for my Glock 19. I am thinking of possibly getting a stainless steel guide rod, just because to me, it will round it out nicely. What are others' opinions? Specifically, on the guide rod? Thanks in advance.

    -WTDeBerry-

  2. #2
    Join Date
    Feb 2010
    Posts
    940
    Feedback Score
    1 (100%)
    The steel guide rod is a waste of money unless you plan on doing magazine dumps all afternoon.

    I think you'll find, that the culture of this forums is skewed pretty far to the function over form side of the spectrum.

    All my Glocks get a decent set of sights, the Vickers Mag Release, and a grip plug. MANY would argue that even the plug is a waste of money, but I have it because I'm more consistent with my reloads with it in.

    The magazine release will be a real, tangible improvement that you will immediately appreciate. You may also want to consider the new Magazine release that is out as well.

    Outside of the sight and mag release recommendations, I'd suggest spending some time shooting the gun to see where it's not meeting your requirements.
    Last edited by opmike; 04-06-11 at 01:50.
    "I have your number. Consider yourself warned."

  3. #3
    Join Date
    Aug 2008
    Location
    Tennessee
    Posts
    36
    Feedback Score
    0
    LAV recommends a good set of night sights, his mag release, his slide release, and a grip plug.
    Last edited by NotDylan; 04-21-11 at 06:20.

  4. #4
    Join Date
    Jan 2008
    Location
    AZ-Waging jihad against crappy AR's.
    Posts
    24,902
    Feedback Score
    104 (100%)
    I recommend a Vickers magazine release and extended slide stop lever. I don't recommend a 3.5 disconnector if you are going to carry this for self defense, unless you add a NY trigger.

    I would leave the standard guide rod assembly in place and focus on shooting the weapon.



    Owner/Instructor at Semper Paratus Arms

    Facebook: https://www.facebook.com/SemperParatusArms/

    Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/

    M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141

    Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com

  5. #5
    Join Date
    Dec 2007
    Location
    Fort Collins Colorado
    Posts
    2,672
    Feedback Score
    4 (100%)
    stock with trijicons here.

    spend your money on a nice holster.

  6. #6
    Join Date
    Nov 2010
    Posts
    151
    Feedback Score
    9 (100%)
    dont mean to thread jack but do you folks carry with the extended mag release? Does it bother you?

  7. #7
    Join Date
    Feb 2010
    Posts
    940
    Feedback Score
    1 (100%)
    Quote Originally Posted by Quinn View Post
    dont mean to thread jack but do you folks carry with the extended mag release? Does it bother you?
    Bother me? Not at all. And it significantly increases my ability to drop the magazine when I want.

    The whole point in the Vickers mag release is to be a little longer than stock, but not too long. It's shorter than the Glock extended magazine release.
    Last edited by opmike; 04-06-11 at 02:10.
    "I have your number. Consider yourself warned."

  8. #8
    Join Date
    Nov 2010
    Posts
    151
    Feedback Score
    9 (100%)
    The inability to reach the mag release without fully rotating the pistol is one of my main gripes with the platform and have contimplated getting one but am hesitant cause my holster does a great job of keeping the weapon attached to my side, I thought the extended release might be uncomfortable.

  9. #9
    Join Date
    Feb 2010
    Posts
    940
    Feedback Score
    1 (100%)
    No, you won't feel it. Again, it's shorter then extended factory unit. If for whatever reason you don't like it, you will have NO trouble selling it.

    Glock really needs to start shipping all models with the Tango Down/Vickers unit, or something similar. I picked up another Glock 19 not too long ago, and I had forgotten how dismal the factory catch is by comparison.
    "I have your number. Consider yourself warned."

  10. #10
    Join Date
    Mar 2011
    Location
    MN
    Posts
    102
    Feedback Score
    4 (100%)

    Ordered same sights...

    Ironically enough I ordered Heinie Straight Eight's yesterday!

    Like others have said, spend some time shooting it!

Page 1 of 15 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •