The MP 50 round drum has arrived. As shown in the photo.....it tips the scale around 16.5lbs. That doesn’t even include the SF 762 SOCOM mini........
https://imgur.com/a/n0QdUUD
The MP 50 round drum has arrived. As shown in the photo.....it tips the scale around 16.5lbs. That doesn’t even include the SF 762 SOCOM mini........
https://imgur.com/a/n0QdUUD
Here is another one......
https://imgur.com/a/nXlZfoj
Thank ya! Both are .308 - bottom is the 18" SS barrel. I can't imagine I won't pick-up a 6.5 barrel at some point, as I have a couple bolt actions chambered in 6.5, and I'd like to have the option.
16" will be getting chopped to 14" with a P/W Dead Air brake and a dedicated Sandman-S.
Last edited by Yama Arashi; 04-22-19 at 14:37.
I recently bought a full-auto bolt carrier from LMT and the firing pin retaining pin doesn’t want to budge. I had to whack it with a hammer and punch to push it out and assemble the BCG. I couldn’t even push it back in by hand. It looks like there’s a roll-pin to capture the retaining pin but it’s interfering along the length of the retaining pin body. Does anyone else experience this and will it loosen up? I essentially can’t disassemble the BCG without tools.
Hello All,
There are a lot of nice rigs and great info on the site. I thought I’d share my kit.
7ABCD888-BC25-4831-A959-1AE082A92E36.jpg
Last edited by Boba Fett v2; 04-25-19 at 09:27.
Factory OD Green mlok posted on LMT’s Instagram page for NRA show!!!!
Bookmarks