Daniel Defense S2W barrel profile: Are they gonna make a 16" version?

[0reo]

So I've been eyeballing the DD S2W barrels. It's got everything I want except it's 18" instead of 14.5-16". Any harm in having a reputable company chop a couple inches off & re-thread so I get the length I want? Or should I just stop being picky & buy the govt. profile in 16" instead?

[bp7178]

I was looking at them a while back and had asked the same question. IIRC, they had them, but they weren't on the site, you had to call and ask for one.

[0reo]

I was looking at them a while back and had asked the same question. IIRC, they had them, but they weren't on the site, you had to call and ask for one.

Seriously? That's really good news. Thanks. Makes me happy. Been wanting one like that for quite a while.

[0reo]

So my 16" 5.56 S2W barrel came in the mail today. I must say this thing is a work of art. A real beauty. Can't wait to get the gun assembled & run-in!

[bp7178]

Post some pics when you get that bad dog built!

I think that is one of the more intresting barrels on the market.

[0reo]

Forward of the gas block I don't think you'd notice it from a pencil barrel.

I noticed that these barrels have been finished on a lathe, or at least it appears that way. Instead of the typical hammer-forged surface texture there's what I recognise as a lathe-tooling surface texture.

I wonder why DD hasn't listed these anywhere yet?

[0reo]

Had this barrel out for a comparison shoot today. Finally.

I set up on a bench with a Rock BR front rest and Edgewood Minigator rear bag. This was the first use of these items as well and I couldn't get the rear bag to stay in one place which had a small negative effect on my accuracy.

I also used a 16x Bushnell Elite 6500 scope. Wanted to test the gun / barrel, not my vision.

Ammo was my reloads and some cheap wally world Federal 100pk. My reloads were carefully crafted but in no way optimized for this gun. Used a 77gr Nosler hpbt, FC brass, Wolf lrm primer, TAC powder. Don't remember the charge weight but they were medium-light loads.

Results- This barrel easily shot 1moa with my reloads and I suspect that if I took the time to work out a dedicated load optimized for this gun I could get sub-moa sure enough. The cheap federal stuff shoots like shit in every gun I've tried it in so far but this barrel did a quick 1" 5-shot group at 50yds with it while I was getting the scope on paper. Thats plenty good for rds / iron work, for my eyes anyway.

Long story short, this is an excellent barrel and I'm a happy customer.

For the record, I was shooting 5/8 moa with the same reloads at 100yds & 200yds in my 20" lothar-walther stainless hbar.

[Rockhopper]

Digging up old thread here. Any longer term report? And just to double check, these barrels are NOT chrome lined correct?

[0reo]

They ARE infact chrome lined.

Long term report (limited time to shoot these days means you can't really call it that) is that I'm very satisfied. I'd like to build a 6.8spc upper with one but between the gun grabbers going batshit crazy and saving to relocate my family to more friendly territory its not a realistic priority any time soon.

[Rockhopper]

Good to hear. I just ordered one yesterday.