The modification is by no means rocket science but every time the Gunfighter CH topic comes up, I tend to get the same questions as to "why" I prefer the PRI Combat Latch set up and "how" its done. For some it really makes no sense, but for those like myself who very much like the PRI type Combat Latch, they really love these. I just did several more and of course decided to shoot a video on the process.
When the Gunfighter was first released a couple of conversations here at M4C led me to start modifying the PRI Combat Latch which I prefer to work with the GF handle. Basically the response from Paul at BCM was that they didn't see why the PRI wouldn't work in the same manner as the stock GF latch if you could replicate the cuts correctly on the latch. Of course after some quick tinkering the results were just what I wanted and the PRI latch worked in the exact same manner that the stock latch works in keeping the load off the roll pin and on the latch and handle. It isn't cheap as you need the GF and the PRI Latch and you need about 10-15 mins of your own time. I do so many now, that I can get one done from disassembly to reassembly in about 10 mins or so.
Now I can just refer to this thread in the future.
http://www.youtube.com/watch?v=0tMfMXZoTJ4



Reply With Quote


Bookmarks