Can anyone give me a reference or a good tutorial on how to properly use a Broken Shell Extractor?
Seems quite obvious enough, just wanted to be better informed.
HSD
Can anyone give me a reference or a good tutorial on how to properly use a Broken Shell Extractor?
Seems quite obvious enough, just wanted to be better informed.
HSD
"Lions mustn't concern themselves with the opinions of lambs."
I suppose below sums it all up?
Manufacturer: Cheaper Than Dirt! - Mfr# TOOL0303
Goes in the back of cartridge with the base pulled off. Catches the spent shell on the inside neck and pull it out by using the guns regular extractor. Works will bolt action and semi-auto rifles. Instructions for use: When the head is torn from the case leaving the majority Of the shell casing inside the chamber of your weapon You will need a Broken Shell Extractor (BSE from here on out) to safely remove it from the chamber. 1. Insert the narrow end of BSE into the chamber with the casing stuck inside. Make sure that the inner pin is unscrewed so the end is not flared. (You will know what I mean when you see it) 2. Once the BSE is proplerly installed into the chamber you can release the bolt. Then you can pull the bolt back, by doing so it will pull the BSE back and and the end will flare and grab the case opening where the bullet was and pull it out like a regular loaded round.
"Lions mustn't concern themselves with the opinions of lambs."
Bookmarks