Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Adapting the LaRue Handstop to non-railed forearms

  1. #1
    Join Date
    Nov 2008
    Location
    Portland, Oregon
    Posts
    1,866
    Feedback Score
    23 (100%)

    Adapting the LaRue Handstop to non-railed forearms

    The LaRue Handstop and YOU!



    Handstops, they're all the rage these days. And for good reason, low profile, light, and able to help get a consistant grip especially on longer rail systems.

    One of my favorites is the LaRue Tactical handstop, why? because it's a light chunk of plastic, contoured well, and super simple. It easily attaches to the hardpoints of the LaRue rails, or slides over a picatinny rail, with ease.

    "But I don't have a LaRue PredatAR/OBR rail, nor do I have a railed forearm, Isaac. Am I shit out of luck?"

    Well no, Timmy! In fact, your shit is FULL of luck! Let me explain. Generally this information will apply to two forearms that I own, the Troy VTAC rail and the Magpul MOE forearm. The majority of the modifications are the same with a few minor details in the finishing.

    What I used (what you'll probably want to use).
    -Bandsaw (Metal-cutting blade / non-metal cutting blade)
    -File
    -Sandpaper
    -Drill Press
    -Aluma-black
    -Loctite
    -Patience
    -MOE Rail screw and backer (MOE mod)

    Here's the process in a nutshell for the VTAC rail, you have to cut the top of the handstop off, which is the part that actually holds to the picatinny rail. I use a bandsaw to create a nice even cut. Then use sandpaper to create a nice even surface, and round and sharp edges created.



    You'll notice this now creates an arc that allows the bottom to contour to a round forearm. I sugest using the LT handstop that already has the hole in it, so that it saves you some work. The VTAC rail comes with internal rail backers to allow you to attach rail portions along the attachment points. I seriously doubt people are using all of these rails, so you should have a spare one sitting around. I take the shortest one I have, and cut it in half (as pictured). Then using some aluma-black (or a pen) darken the exposed metal (after sanding it).





    You'll need to widen the handstops hole to match the diameter of the new screw. With all of these components in place just position the shortened rail attachment backer where you want it (I used some matches to wedge the rail backer in place so it didn't keep falling out), put some loctite on your screw, put it through the handstop and into the backer, go finger tight, put a witness mark on it, grab a beer and congratulate yourself on a job well done.



    But wait, you don't have a VTAC rail, you've got a MOE forearm? Damnit why didn't you tell me these details upfront?! Alright, fine. The plan is the same for the most part. You'll want to remove the top portion of the handstop (usually about 4-5mm of material), I also suggest removing about 8mm off the back of the handstop to avoid a step I'll get into in a bit.



    Now you'll notice that the MOE forearm has a round contour on the bottom. But it has ribbing that runs perpendicular to the forearm. Frankly I didn't want the handstop to be wedged up on one of those ribs. So I took the step of creating a notch in the modified handstop. I used a flat-sided file (later versions I used a 3-axis mill because frankly mills kick ass), and created a notch about 3mm deep, then used a small file to clean up the edges, and high grit sandpaper to complete the work.



    This is a grove that runs across both sides, so marking across using a ruler is probably a good idea. Width is about 8mm wide but you can eyeball it. This will also prevent the handstop from wiggling, as well as prevent the handstop from pulling back. It's best to position the handstop where you want it first, mark it, then carve your notch, otherwise you'll have to start again.

    So why did I cut the back off the LT handstop? Because at first I created two sets of grooves. This makes the positioning of the second set of grooves precise, but it's also un-needed. Halfway through I ended up cutting the second set off because A) it wasn't needed and B) it saved me more time.

    Now taking your MOE rail backer, and MOE screw, take the bottom of the forearm off, place your backer, install your screw through the modified LT handstop, and tighten (The MOE screw will thread through the LT handstop without reeming out a bigger hole). Install the lower portion of the forearm back on. And go grab a beer.





    Note: Older version with two cut outs. Don't waste your time like I did.

    That's it. Nothing more to it. But the end results should look factory if you take your time and measure twice / cut once.

    Hope this helps!
    "There he goes. One of God's own prototypes. Some kind of high powered mutant never even considered for mass production. Too weird to live, and too rare to die."

  2. #2
    Join Date
    Jun 2006
    Location
    SE FL
    Posts
    14,148
    Feedback Score
    5 (100%)
    Good post. I just ordered a 1.75" sanding drum to muck around with doing the same thing to an AFG. I don't really care for the AFG but haven't spent oodles of time with it so thought this would make a good way to do both.

    I hadn't considered taking it to the Larue part.
    Last edited by rob_s; 02-13-12 at 12:16.

  3. #3
    Join Date
    Feb 2011
    Posts
    869
    Feedback Score
    13 (100%)
    Great post, titleist! Do you work for ML?
    www.thealaskalife.com www.facebook.com/thealaskalife
    Quote Originally Posted by okie john View Post
    Posers buy guns. Shooters buy ammo.
    Okie John

  4. #4
    Join Date
    Nov 2008
    Location
    Portland, Oregon
    Posts
    1,866
    Feedback Score
    23 (100%)
    Quote Originally Posted by hunt_ak View Post
    Great post, titleist! Do you work for ML?
    Nope. I do not, that might be in reference to two images that have the watermark for LT. I grabbed those off his site purely because I needed a side profile shot to illustrate the cuts. All rights belong to LT and Mark Fingar.
    "There he goes. One of God's own prototypes. Some kind of high powered mutant never even considered for mass production. Too weird to live, and too rare to die."

  5. #5
    Join Date
    Feb 2011
    Posts
    869
    Feedback Score
    13 (100%)
    Quote Originally Posted by Titleist;1228924...
    that might be in reference to two images that have the watermark for LT...
    Yes it was....good review, man. I'll be coming back to this, for sure!
    www.thealaskalife.com www.facebook.com/thealaskalife
    Quote Originally Posted by okie john View Post
    Posers buy guns. Shooters buy ammo.
    Okie John

  6. #6
    Join Date
    Dec 2009
    Location
    Wisconsin
    Posts
    796
    Feedback Score
    13 (100%)
    Fantastic post. Thanks for posting this, I was wondering how you had done it.

  7. #7
    Join Date
    Jun 2006
    Posts
    10,039
    Feedback Score
    1 (100%)
    These "handstops" have been out for the past ten years or so, $10 for two, and you can get them in different sizes... they mount nice and easy. Check out the Pearce Grip extensions for Glocks the next time you are at a gun store.

    http://www.cheaperthandirt.com/2PG380-1.html

    Last edited by Stickman; 02-13-12 at 15:08.
    Stick


    Board policy mandates I state that I shoot for BCM. I have also done work for 200 or so manufacturers within the firearm community. I am prior service, a full time LEO, firearm instructor, armorer, TL, martial arts instructor, and all around good guy.

    I also shoot and write for various publications. Let me know if you know cool secrets or have toys worthy of an article...


    Flickr Tumblr Facebook Instagram RECOILMAGAZINE OFF GRID RECOIL WEB

  8. #8
    Join Date
    Feb 2009
    Posts
    1,728
    Feedback Score
    7 (100%)
    My mind just got blown

  9. #9
    Join Date
    Apr 2007
    Location
    Texas
    Posts
    10,904
    Feedback Score
    44 (100%)
    Isaac, thank you very much for the research and your time. I have been daydreaming about something like this to go with a rifle-length MOE handguard.

  10. #10
    Join Date
    Aug 2011
    Posts
    325
    Feedback Score
    30 (100%)
    Quote Originally Posted by Stickman View Post
    These "handstops" have been out for the past ten years or so, $10 for two, and you can get them in different sizes... they mount nice and easy. Check out the Pearce Grip extensions for Glocks the next time you are at a gun store.

    http://www.cheaperthandirt.com/2PG380-1.html
    Thanks for posting this. I ended up buying a pearce glock mag extension and modified it with the dremel to fit on my rainier arms evolution rail. Very pleased with the end product.
    Last edited by titanse05; 06-23-12 at 19:14.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •