Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 60

Thread: Dedicated Suppressed AR vs. Standard AR Suppressed Results

  1. #31
    Join Date
    Mar 2011
    Posts
    171
    Feedback Score
    0
    Would this setup work with an AAC M4 mini or would that not supply enough backpressure gas?

  2. #32
    Join Date
    May 2006
    Location
    VA/OH
    Posts
    29,631
    Feedback Score
    33 (100%)
    I might have missed it, but is the GP size on the 10.3?



    C4

  3. #33
    Join Date
    Aug 2010
    Posts
    12,145
    Feedback Score
    43 (100%)
    0.058" +/- 0.001
    Why do the loudest do the least?

  4. #34
    Join Date
    May 2006
    Location
    VA/OH
    Posts
    29,631
    Feedback Score
    33 (100%)
    Quote Originally Posted by Eurodriver View Post
    0.058" +/- 0.001
    Ok. That might be a bit small (assuming you want the gun to run, but not lock back without the can on).

    Are you using an LMT Enhanced Carrier?


    C4
    Last edited by C4IGrant; 12-17-11 at 14:59.

  5. #35
    Join Date
    Aug 2010
    Posts
    12,145
    Feedback Score
    43 (100%)
    Quote Originally Posted by C4IGrant View Post
    Ok. That might be a bit small (assuming you want the gun to run, but not lock back without the can on).

    Are you using an LMT Enhanced Carrier?


    C4
    Negative, everything is completely USGI.

    I must be just barely off the money because when firing unsuppressed it will eject the spent case but not go far enough to pick up a new one.
    Why do the loudest do the least?

  6. #36
    Join Date
    Nov 2010
    Location
    MI
    Posts
    3,516
    Feedback Score
    22 (100%)
    Quote Originally Posted by Eurodriver View Post
    Are you talking about manufacturing your own bolt carrier? Because even an LMT enhanced carrier with an A5 assembly will not make an overgassed carbine with a suppressor shoot as smoothly as shrinking the gas port size will.
    Yes, the LMT EC is not designed to compensate for a suppressor.
    Black River Tactical
    BRT OPTIMUM Hammer Forged Chrome Lined Barrels - 11.5", 12.5", 14.5", 16"
    BRT EZTUNE Preset Gas Tubes - PISTOL, CAR, MID, RIFLE
    BRT Bolt Carrier Groups M4A1, M16 CHROME
    BRT Covert Comps 5.56, 6X, 7.62

  7. #37
    Join Date
    May 2006
    Location
    VA/OH
    Posts
    29,631
    Feedback Score
    33 (100%)
    Quote Originally Posted by Eurodriver View Post
    Negative, everything is completely USGI.

    I must be just barely off the money because when firing unsuppressed it will eject the spent case but not go far enough to pick up a new one.

    I have to wonder if the LMT EC would allow it to cycle without the can on.

    C4

  8. #38
    Join Date
    Aug 2010
    Posts
    12,145
    Feedback Score
    43 (100%)
    Quote Originally Posted by C4IGrant View Post
    I have to wonder if the LMT EC would allow it to cycle without the can on.

    C4
    Me too. I have enough spare cash to justify buying an EC if it works, but I'm concerned I'd drop the $200 for no improvement and then I'm stuck with it. (Thats a tax stamp!)
    Why do the loudest do the least?

  9. #39
    Join Date
    Mar 2010
    Location
    Maine
    Posts
    7,868
    Feedback Score
    0
    Quote Originally Posted by C4IGrant View Post
    I have to wonder if the LMT EC would allow it to cycle without the can on.

    C4
    If it works on my .056'' it should work on a .058''.

    My KAC carriers will not cycle unsuppressed at all.

    My LMT will. 5.56mm. M855, M193, Mk. 262.
    We miss you, AC.
    We miss you, ToddG.

  10. #40
    Join Date
    Feb 2011
    Posts
    196
    Feedback Score
    1 (100%)
    Does anyone suspect I will have problems swapping between a suppressed 11.5" BCM upper and an unsuppressed 10.5" Noveske. I would be using the same lower with an H2 buffer?

Page 4 of 6 FirstFirst ... 23456 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •