Geissele SMR Picture Thread

[SWThomas]

I think I'm gonna get one of these for my 300black build.

[uniform64]

Anyone know if the 9.5 MK4 will clear a Middy FSB?
Thanks

[Wolverine6G]

Anyone know if the 9.5 MK4 will clear a Middy FSB?
Thanks

Im almost certain it will not work.

[wetidlerjr]

My "Jack Daniels" AR15, which is just a BCM Jack Carbine clone.
http://i154.photobucket.com/albums/s...ps0fe92c30.jpg

My "Billy Jack" AR15 which is just a BCM Jack Carbine near-clone.

BCM_MID122812 (1).jpg

BCM_MID122812 (10).jpg

BCM_MIDJACKa.jpg

[CoryCop25]

[Wake27]

this is going to get locked we already have a pic thread for this and I dont think you can just start a pic thread?

Its more of an info thread than pic thread, and its pretty hard to keep it all straight since they're constantly updating the designs. I didn't realize they have MOD numbers on them though, that'll help.

[Riddle]

I didn't realize they have MOD numbers on them though, that'll help.

not all of them do. it looks like mine is an earlier mk2 version (no "rev" or qd hole). Does anyone know of all the different variations? it'd be nice to get a list going of what changes are made to each revision

[JChops]

Here's a list I've kept to get you started. I've built uppers with the following versions so these are all confirmed. I don't know if this list is complete but feel free to add if you can confirm something not shown:


MKI 10", 13" (Slick, smallest OD, threaded inserts to attach rails direct)
Version 1: Original design. Steel barrel nut. Heli-coil barrel nut bolt holes. Oversize phillips-head socket cap bolts. Laser engraving along top.
Version 2: Exactly the same as V1 but with QD sockets on both sides.
Version 3 (Current): Bottom vent holes redesigned to pear shape. Steel nut updated to new chamfered design. Anti-rotation "wings" reduced to smaller tabs like MKIV. Bolts updated to lo-pro allen head socket caps and are countersunk into rail like MKIV. Phosphated steel retainer countersunk on opposite side like MKIV. Laser engraving moved near barrel nut like MKIV. Black anodizing has a blue tint to it.

MKII 9.5", 10", 13" (Slick, larger OD, removable keyed backer plates that serve as mounts for rails)
Version 1: Original design. Steel barrel nut. Heli-coil barrel nut bolt holes. Allen socket cap bolts with slight countersink. Laser engraving along top.
Version 2: Exactly the same as V1 but with QD sockets on both sides.
Version 3 (Current): Bottom vent holes redesigned to pear shape. Steel nut updated to new chamfered design. Anti-rotation "wings" reduced to smaller tabs like MKIV. Bolts updated to lo-pro allen head socket caps and are countersunk into rail like MKIV. Phosphated steel retainer flush-mount on opposite side like MKIV. Laser engraving moved near barrel nut like MKIV. (Also, note that the 9.5" rail has replaced the 10" rail.)

MKIV 9.5", 13" (Slick with short fixed rails at 3, 6 and 9 o'clock)
Version 1: Original design. Only current rail with aluminum barrel nut. Small anti-rotation wings. Larger head allen socket cap bolts, countersunk. Phosphated steel retainer flush-mount on opposite side. Laser engraving near barrel nut.
Version 2 (Current): Aluminum nut updated to new chamfered design. Bolts are newer lo-pro allen head socket caps. Vent holes below barrel nut removed.


You could also add the following prototypes and specials that have been shown publicly:

• The "Trident" Rail — 13" MKIV (Sand) rail w/ square bottom vent holes (owned by a member here)
• Citizen Arms Rails — 9.5" & 13" MKII & MKIV rails with HK416 style keyed anti-rotation
• Cola Warrior Rails — (2) 13" MKIV rails (Sand, Grey), with special engraving and HK416 style keyed anti-rotation
• Keymod rail — 9.5" MKIV (in the white) proof of concept shown recently by Bill

[Riddle]

^^^exactly what i had in mind. thanks!

[scoob]

Here's a list I've kept to get you started. I've built uppers with the following versions so these are all confirmed. I don't know if this list is complete but feel free to add if you can confirm something not shown:


MKI 10", 13" (Slick, smallest OD, threaded inserts to attach rails direct)
Version 1: Original design. Steel barrel nut. Heli-coil barrel nut bolt holes. Oversize phillips-head socket cap bolts. Laser engraving along top.
Version 2: Exactly the same as V1 but with QD sockets on both sides.
Version 3 (Current): Bottom vent holes redesigned to pear shape. Steel nut updated to new chamfered design. Anti-rotation "wings" reduced to smaller tabs like MKIV. Bolts updated to lo-pro allen head socket caps and are countersunk into rail like MKIV. Phosphated steel retainer countersunk on opposite side like MKIV. Laser engraving moved near barrel nut like MKIV. Black anodizing has a blue tint to it.

MKII 9.5", 10", 13" (Slick, larger OD, removable keyed backer plates that serve as mounts for rails)
Version 1: Original design. Steel barrel nut. Heli-coil barrel nut bolt holes. Allen socket cap bolts with slight countersink. Laser engraving along top.
Version 2: Exactly the same as V1 but with QD sockets on both sides.
Version 3 (Current): Bottom vent holes redesigned to pear shape. Steel nut updated to new chamfered design. Anti-rotation "wings" reduced to smaller tabs like MKIV. Bolts updated to lo-pro allen head socket caps and are countersunk into rail like MKIV. Phosphated steel retainer flush-mount on opposite side like MKIV. Laser engraving moved near barrel nut like MKIV. (Also, note that the 9.5" rail has replaced the 10" rail.)

MKIV 9.5", 13" (Slick with short fixed rails at 3, 6 and 9 o'clock)
Version 1: Original design. Only current rail with aluminum barrel nut. Small anti-rotation wings. Larger head allen socket cap bolts, countersunk. Phosphated steel retainer flush-mount on opposite side. Laser engraving near barrel nut.
Version 2 (Current): Aluminum nut updated to new chamfered design. Bolts are newer lo-pro allen head socket caps. Vent holes below barrel nut removed.


You could also add the following prototypes and specials that have been shown publicly:

• The "Trident" Rail — 13" MKIV (Sand) rail w/ square bottom vent holes (owned by a member here)
• Citizen Arms Rails — 9.5" & 13" MKII & MKIV rails with HK416 style keyed anti-rotation
• Cola Warrior Rails — (2) 13" MKIV rails (Sand, Grey), with special engraving and HK416 style keyed anti-rotation
• Keymod rail — 9.5" MKIV (in the white) proof of concept shown recently by Bill

Great info. Thanks!