Originally Posted by
officerX
I bought a DPMS bolt catch from Brownells but it didn’t come with the spring and plunger. Do I just use a standard AR15 spring and plunger or are those parts AR308-specific as well?
My iPhone XS Max is better than your android!
The only thing you want to probably do is make sure you either have an extended mag catch lever or you get an extended mag catch button. I’ve done both and they equate to the same although I preferred the extended button from Forward Controls. The rest of the LPK is the same except (typically)the takedown and pivot pins. I see you have a Cross Armory lower - so check with them if you need those extended pivot and takedowns. Pins are the same except the takedown detent normally is next to the selector switch detent. I normally drill out a divot in the pistol grip just for the takedown detent since it’s not installed in front of the end plate on AR-10’s.
Sent from my iPhone using Tapatalk
"Texas has yet to learn submission to any oppression, come from what source it may."
~ Sam Houston
“The liberties of our country, the freedom of our civil constitution, are worth defending against all hazards: And it is our duty to defend them against all attacks.”
~ Sam Adams
Bookmarks