I'm assuming not hearing safe at the ear?Originally Posted by lahunter57
I ask because I have a K and S awaiting approval, and I just assumed the k would be terrible on a 16"308.
|
||||||||||||||||||||||||||||||||||||||
Senior Member
I'm assuming not hearing safe at the ear?
I ask because I have a K and S awaiting approval, and I just assumed the k would be terrible on a 16"308.
Member
My MWS runs flawlessly with a Saker, in factory form with no buffer changes.
Sent from my iPhone using Tapatalk
Senior Member
It's possible LMT could've have made slight changes to the port sizes in newer barrels given the reputation for not running certain cans without issue. Of course this is pure speculation and I have nothing to base that on. One thing I do find interesting is the fact that I now run my Saker on my SR25 ACC and I've experienced no problems with running the factory configuration (factory spring and H2 buffer) in terms of reliable feed and ejection. On two separate occasions I experienced an accidental bump fire/double tap when running the can, but that's something I've experienced with other suppressed setups as well.
"People have always been stupid. The Internet just makes it easier for us to know about them." - donlapalma
Senior Member
ALCON, several weeks ago another LMT owner put out a net call (on FB) looking for a barrel locking screw for his MRP/MWS. I happened to have an extra on hand so I paid it forward and sent it to him gratis. Now I find myself needing a replacement locking screw myself. I went to order direct from LMT's website, but standard shipping rate is $15, which I think is pretty ridiculous for a pair of screws, never mind the fact that they're not the fastest at processing orders and getting things shipped out in a timely manner. Anyway, if any of you guys have an extra locking screw to spare please let me know. I'll gladly pay for it and whatever a more reasonable shipping cost might be. Thanks. Charlie Mike
"People have always been stupid. The Internet just makes it easier for us to know about them." - donlapalma
Member
I’ve done that on my 556 rifles, but yet to do it on large frame. You didn’t happen to be shooting off of a bipod that you had loaded up, did you? And also, I know when I’m shooting off of the bench, even with AR’s, I tend to rest my thumb on the same side of the grip as the rest of my hand, kind of like how you shoot a precision bolt gun. Those two combined are what gets me my bump fires
Sent from my iPhone using Tapatalk
Member
If I was not on the other side of the planet at the moment I would send you a spare.
Senior Member
Anyone at Shot Show?
Looks like LMT ia releasing a piston version of the MWS.
Last edited by domestique; 01-22-20 at 09:34.
"When governments fear the people, there is liberty. When the people fear the government, there is tyranny. The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." Thomas Jefferson.
Member
I bet those are HEAVY.....
Senior Member
Boba, hit a brother up with your address on pm, I gotcha. I ordered a spare set many moons ago.
I wonder if you can get these at an ACE hardware?
PB
Last edited by Pappabear; 01-22-20 at 11:35.
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
Member
They have some torque limiting feature (aka hole drilled down axis). Breaking them might indicate lubricant on the threads which should not be there causing an over-torque (and breaking as a safety).
v1tactical carries them.
Posting Permissions
Reply With Quote
Bookmarks