Is there enough barrel/mag extension for one of these? It would be right out at the muzzle but it might clear the Magpul hand guard.
https://www.mesatactical.com/product...ton-12-ga.html
41BN3MWvBzL.jpg
Is there enough barrel/mag extension for one of these? It would be right out at the muzzle but it might clear the Magpul hand guard.
https://www.mesatactical.com/product...ton-12-ga.html
41BN3MWvBzL.jpg
Last edited by TommyG; 02-05-20 at 19:57.
Open the pig!
I don’t think there mag extension/Barrel is long enough for that.
Here is what the SBS started life as.
https://www.remington.com/other-prod...c-14-arm-brace
Hand guard and extension is the same. Just imagine a QD attachment on the hand guard furtherest mlok slot to the rear and a WML on far forward mlok slot.
Something like this may work if I install it in the rear at about 4 o’clock
https://www.impactweaponscomponents....d-micro-mount/
Last edited by ace4059; 02-05-20 at 20:08.
Man that is stubby. Sling plate behind the mag extension and a different hand guard might be the solution if you don't want to go to a single point sling.
Maybe give Wilson Combat or Vang Comp a call and see if they have done one and maybe have a suggestion.
Open the pig!
No idea where the high temp part of the kit went to, but it uses the same ITW loop on a piece of heat resistant cord.
Sent from my LM-X410.FGN using Tapatalk
Excuse the threaded socket, all I had left for this proof of concept were Grove-Tech screw in sockets for wooden stocks:
Attachment 60749
Last edited by 26 Inf; 02-05-20 at 23:26.
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
OP - After some research I believe this will work to clamp on the stubby extension and the barrel:
https://www.brownells.com/shooting-a...prod54745.aspx
I hope so, I ordered one for my TAC-14 (off ebay).
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
Thanks 26 Inf for the suggestions. I think those will best my best bet.
I ordered the Magpul clamp on and the Grove-Tech QD socket. I’ll try the QD socket first because I think it’ll preform best but will have the clamp style for backup.
I hope I haven't led us down the wrong path.
I went out to get the paper 20 minutes ago and there was a Magpul box sitting by the front door, I was giddy, I thought the clamp had come - forgetting for a moment I ordered it off of ebay - instead I found the boc contained the 21 rounds mags and enhanced buffer tubes I had ordered. Magpul ships fast - I ordered those items late Friday night.
Patriotism means to stand by the country. It does not mean to stand by the President... - Theodore Roosevelt, Lincoln and Free Speech, Metropolitan Magazine, Volume 47, Number 6, May 1918.
Every Communist must grasp the truth. Political power grows out of the barrel of a gun. Our principle is that the Party commands the gun, and the gun must never be allowed to command the Party Mao Zedong, 6 November, 1938 - speech to the Communist Patry of China's sixth Central Committee
The magpul clamp fit perfect. I installed it tonight.
I pulled the light since the sling is in the way. Light was the same as the other shotgun. Now to find a new light mount that’s up and out of the way.
Here are pics of the one I added the magpul clamp to and another one for reference.
https://imgur.com/a/CjV1rog
Edit:
Another thought is I could move the light to the bottom of the hand guard.
Last edited by ace4059; 02-11-20 at 21:33.
Bookmarks