I sold Benchmades years ago, and consequently own quite a few. I have several blade styles, sizes, etc. I also still think that Benchmade is just about the best value in the knife business, and with the number of different styles they make today I always start with them when I'm knife shopping and then go to the competition if Benchmade doesn't have something that will fill my needs, which is rare.
I have gotten away from any tanto or serrated blade styles. While I do think they can serve their purpose, I don't find that either is suitable for my use. Combine the two and you've got yourself an even less useful tool.
Let's look at the Griptilian with thumb stud as an example (even though I think the one with the thumbhole is a better tool)
Here's the basic Griptillian. Notice the full smooth cutting edge of the standard blade. The blade is 3.45" long and you essentially have the full length of the blade for cutting.
Now here's the same blade style, but partially serrated. Notice that the serrations take up at least 1/3 and more like 1/2 of the total cutting edge of the knife. Yes, the serrations still cut too, but depending on what you're cutting you may not want that jagged of a cut, and in my experience a sharp non-serrated blade will cut through things like zip-ties and packing straps, and even extension cords, without a problem.
And here's the tanto version. See how the sharp angle in the blade reduces the cutting edge even further? The longest uninterrupted cutting edge on the knife is now the serrated portion. If what you want is a serrated knife, buy a serrated knife, because buying this blade style is just about useless for any fine cutting.
One last suggestion, and I don't think this option exists in the mini-Griptilian models, but if you're going to be doing any cutting that involves plunging the knife into something, or if you're going to be using the full length of the blade for cutting, consider getting the thumbhole model. In my experience the thumb stud just gets in the way, and gets mucked up with whatever you're trying to cut in these situations.
If you're wondering where I come up with all this nonsense, it's from carrying and using a very early production Benchmade Striker as a daily work knife on a construction site. This knife was used to dig holes, cut insulation off of chilled water pipes, cut many a head off of a defective extension cord, and also open boxes, pull staples from plans, and even do a little paper cutting in the office. Notice the amount of finish wear as a testament to how well used this knife was. In the year that I used it I sent it back to Benchmade once for the lifesharp mostly because I kind of dinged the blade edge on the foremost cutting surface using the knife as a screwdriver.
and what's my current daily carry knife on the jobsite? The one below, based on all the lessons I learned trying to use the Striker as a work tool.
Bookmarks