Im wanting to get a rifle like my SDMR I had in the Army but I cant find anyone who makes them. Am I gonna have to build it part by part or does someone actually build a complte upper?
Im wanting to get a rifle like my SDMR I had in the Army but I cant find anyone who makes them. Am I gonna have to build it part by part or does someone actually build a complte upper?
C co 1/30th Infantry Regiment
3rd Brigade 3rd Infantry Division
2002-2006
OIF 1 and 3
IraqGunz:
No dude is going to get shot in the chest at 300 yards and look down and say "What is that, a 3 MOA group?"
http://www.whiteoakarmament.com/
makes the barrels and possibly the upper as a special order (its not specifically mentioned on the site)
Comments from someone who builds them: http://designatedmarksman.com/files/AMU%20rifle.pdf
More parts info: http://en.wikipedia.org/wiki/United_...Marksman_Rifle
.
Last edited by danpass; 10-15-10 at 08:11.
Dan Miami, FL
Not EXACTLY the same, but these will get you close.
http://www.bravocompanyusa.com/AR-15...Group-s/26.htm
http://www.bravocompanyusa.com/BCM-U...m-urg-samr.htm
http://www.bravocompanyusa.com/BCM-U...am%20vis12.htm
Technically the SAM-R uppers from BCM aren't true-to-spec SAM-R clones, more SAM-R/SDM-R hybrids. BCM's SAM-R would get pushed farther to the left of 'The Chart', though. The BCM SAM-R has M4 feed ramps, which the SDM-R lacks. The real SAM-R, however, has a 1:7 twist barrel, while the SDM-R has a 1:8.
Last edited by Whootsinator; 10-14-10 at 22:31.
perhaps we could put this in Precision:Semi-Auto
Dan Miami, FL
Probably worth a look at Centuron's lineup.
I was looking for an SDM rifle not long ago and decided the best way to go to get what I wanted was build it myself.
I went with a compass lake engineering profiled douglas barrel, and the rest of the parts are as close to the real thing as possible(minus the vortex and optic). I even used the armalite lower reciever that some sdm rifles are supposed to have.
This was my first build, and it was way easier than I imagined. About a week ago I used this rifle to make hits out to 700yds on man sized steel.
It normally wears a leupold mk4 2.5-8x optic
You can email John at Rainier Arms
Buy a Rainier Arms upper with:
White Oak Arms 20" Barrel
Daniel Defense 12.0 M4 Rail
White Oak FSB and Gas Tube
Fill it with a BCG of your choosing (Ranier, Daniel Defense, BCM, LMT, GTS), Charging handle (Rainier or BCM Forged; BCM Gunfighter4), and you've got the upper.
عندما تصبح الأسلحة محظورة, قد يملكون حظرون عندهم فقط
کله چی سلاح منع شوی دی، یوازي غلوونکۍ یی به درلود
Semper Fi
"Being able to do the basics, on demand, takes practice. " - Sinister
Bookmarks