I am building a lightweight for my wife:
1. CMMG govt profile 11.5"barrel
2. Clark custom carbon fiber handguard - 6oz
3. ACE ultra light stock
4. Looking for a no F/A upper receiver
I am building a lightweight for my wife:
1. CMMG govt profile 11.5"barrel
2. Clark custom carbon fiber handguard - 6oz
3. ACE ultra light stock
4. Looking for a no F/A upper receiver
there used to be a Maryland AR shooters MSN group that had a huge spreadsheet of weights of just about everything. I think the group went away and therefore who knows what happened to the chart. I think I saved it a couple of times so if I can find it I'll put it in google docs, share it, and we can start adding to it. Might take me a little bit to find.
I found a few two year old archived versions of the Maryland AR Shooters (once excellent) site.
http://web.archive.org/web/200805242...pgmarket=en-us
http://tinyurl.com/ybhrepk
Both take a long, long time to load and navigate. The second appears to be slightly faster, but the colors make reading menus a PIA. If I can find the chart there, I'll post it.
ETA: I'm thinking of dedicating a computer to just navigating this stuff. I've yet to get beyond the first page. But, one poster on another site (not TOS) stated they got some info off the archive a few weeks ago, so ...)
Last edited by Amicus; 03-25-10 at 10:30. Reason: New thoughts
'That whole effort was held together by sweat, shame, and a tiny bit of pride.' -- Son of Commander Paisley
Bad news: the link to that chart is DEAD. The reference notes that it was member-only accessible, and that may explain it.
rob_s: no pressure.
'That whole effort was held together by sweat, shame, and a tiny bit of pride.' -- Son of Commander Paisley
Once I find, and convert, the Maryland chart I'll start a new thread where we can compile info into one place.
Wold be good to get people to post pictures of the items on the scale as it alleviates any confusion (was that with the screws or without, what xyz did you have inserted, etc.).
Here's what I have so far. I just don't have enough time in the day to take pics of everything on the scale.
Colt CAR stock body (plastic) 4.4oz
VLTOR E-Mod stock 13.6oz
LMT SOPMOD stock body 11.3oz
Magpul CTR stock body 8.9oz
Magpul UBR body 1lb 7.3oz
Magpul PRS body 1lb 10.9oz
Rifle receiver extension 3.4oz
Magpul UBR aka entry length receiver extension 2.7oz
Unknown mil-spec carbine receiver extension 3.8oz
VLTOR mil-spec receiver extension 3.7oz
BCM castle nut and end plate 1.2oz
Daniel Defense QD end plate (w/o QD loop) 0.4oz
Commercial A2 pistol grip 2.6oz
Magpul MOE pistol grip 2.4oz
Tangodown pistol grip 3.6oz
Hogue pistol grip 2.7oz
Ergo pistol grip 3.2oz
Aluminum OEM triggerguard 0.3oz
Magpul MOE triggerguard 0.2oz
Magpul enhanced triggerguard 0.5oz
Norgon ambi-catch (no stock spring or button) 0.5oz
OEM mag catch (no spring or button) 0.4oz
Troy flip up rear sight 1.8oz
Troy fixed rear sight 2.1oz
DD fixed rear sight 1.7oz
DD fixed front sight 1.2oz
Magpul MBUS front sight 1.2oz
LMT MRP fixed front sight 2.2oz
A2 flash hider 2.1oz
A1 flash hider 2.0oz
Surefire Brake (for 556K, 212) 3.8oz
Troy medieval flash hider 3.0oz
Magpul 20 round magazine (w/o dust cover) 3.4oz
Lancer 30 round magazine 4.2oz
Tangodown 30 round magazine 5.3oz
VTAC low profile QD sling mount 0.8oz
VTAC LUSA sling mount 0.9oz
BCM standard CH 1.2oz
BCM bolt 1.6oz
BCM cam pin 0.3oz
BCM carrier key and screws 0.9oz
BCM Forward assist and spring 0.9oz
A2 delta ring assy 2.7oz
Snap ring 0.2oz
Weld spring 0.3oz.
Delta ring A2 0.9oz
Barrel nut (stock) 1.3oz
A1 handguard ring (ring only) 0.4oz
CAR/M4 handguard cap 0.4oz
Arrendondo mag catch (plastic button, 2 screws and button extension) 0.2oz
OEM mag catch button 0.1oz
Magpul AFG with screw and flat insert 3.0oz
VTAC light mount 1.8oz
Dust door assy, spring, rod and c-clip 0.8oz
BCM firing pin 0.3oz
Magpul ASAP 1.4oz
Gear Sector end plate 0.7oz
BCM long A2 flash hider 2.3oz
RRA 2 stage trigger with springs and pins 2.5oz
Geissele SSA trigger with springs and pins 2.3oz
OEM fire control (hammer, trigger, disconnector, pins and springs) 2.5oz
AAC M4-2000 51 tooth brake 3.7oz
Magpul enhanced (long) stock pad (w/o screws) 2.1oz
Troy 9 TRX rail with bbl nut and two mounting screws 8.7oz
VTAC/Troy TRX 9 rail with bbl nut and two mounting screws 9.8oz
VTAC/Troy TRX 11 rail with bbl nut and two mounting screws 11.4oz
VTAC/Troy TRX 13 rail with bbl nut and two mounting screws 12.6oz
DD 12 RIS II rail with all mounting screws, bbl nut, 6 screws and flange 1lb 2.2oz
DD 12 RIS II FSB model with all mounting screws, bbl nut, 6 screws and flange 1lb 12oz
DD 9.5 RIS II Mk18 rail with all mounting screws, bbl nut, 6 screws and flange 14.3oz
DD 10 Lite rail with all mounting screws, bbl nut, 6 screws and flange 13.0oz
DD 9 Lite rail with all mounting screws, bbl nut, 6 screws and flange 12.2oz
DD 12 Omega with all mounting hardware 13.6oz
DD 9 Omega with all mounting hardware 9.9oz
DD 7 Omega with all mounting hardware 7.8oz
DD 7 Omega piston rail with all mounting hardware 8.4oz
YHM 12 diamond rail barrel nut, slip ring and 2 anti-rotational screws 1lb 4.3oz
YHM Spectre length diamond rail with barrel nut, slip ring and 2 anti-rotational screws 1lb 0.5oz
Chief Armorer for Elite Shooting Sports in Manassas VA
Chief Armorer for Corp Arms (FFL 07-08/SOT 02)
Bookmarks