Last edited by TriggerFish; 05-19-21 at 13:39.
Not much new or exciting on this one. Couple things I'd like to do but not in a rush.
Sent from my SM-G920V using Tapatalk
Stick
Board policy mandates I state that I shoot for BCM. I have also done work for 200 or so manufacturers within the firearm community. I am prior service, a full time LEO, firearm instructor, armorer, TL, martial arts instructor, and all around good guy.
I also shoot and write for various publications. Let me know if you know cool secrets or have toys worthy of an article...
Flickr Tumblr Facebook Instagram RECOILMAGAZINE OFF GRID RECOIL WEB
Here is my Colt 6450 lower with RRA upper (10.5" barrel). It has an extended buffer that weighs 8 oz., Kaw Valley trigger and hammer springs. I polished the sear and hammer engagement and the trigger breaks at a crisp, no grit 3.8 #. Reset is very positive. I also put in KNS stainless pins at 0.170". It is very accurate and recoil is now lighter with the heavy buffer. Between the buffer and the carrier it is 24 oz.
Last edited by handlebar; 06-07-21 at 10:46.
Bookmarks