I just got the A5-h3 with sprinco springs to replace the A5-h2 on a 10.5 Noveske, 12.5 BCM, and a 14.5 KAC. I shoot 55grain brass, not suppressed.
Any potential issues on any of theses?
I just got the A5-h3 with sprinco springs to replace the A5-h2 on a 10.5 Noveske, 12.5 BCM, and a 14.5 KAC. I shoot 55grain brass, not suppressed.
Any potential issues on any of theses?
Should run fine, might feel a little different is all.
"Air Force / Policeman / Fireman / Man of God / Friend of mine / R.I.P. Steve Lamy"
"That thing looks about as enjoyable as a bowl of exploding dicks." - Magic_Salad0892
"The body cannot go where the mind has not already been."
IR an my Vltor A5 with the standard buffer in my 16.1" middy DDM4 (0.073" gas port) at VTAC Nightfighter last week-end. 1500 rounds of Wolf with no lube and no cleaning, except for the initial light application of MPRO7 LPX before I arrived for the class. Ran great. Only issue was 1 failure to lock back on empty using Lancer mags in unsupported positions, and using Lancer mags, sometimes the round would not strip when loading a fresh mag using the bolt release. PMAG's did not have as much drag on the feed lips and no issues occurred in this manner. Oh, I ran it almost 100% suppressed, as well. I'm a believer in the Vltor system after this. Here are pictures:
That looks awesome.
Sic semper tyrannis.
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
Bookmarks