CZ P-07

[C4IGrant]

Installed the CGW's parts today and did a polish job. DA trigger pull weight is in the 5LBS range and SA pull is a hair under 3LBS. I am going to experiment with their lighter trigger return spring (which should get my DA pull weight to 4.12-4.15 range.

Also installed the Dawson Fiber front and Dawson Rear. Gun is super accurate (hitting 12X18 steel from elevated position at 110yds).


C4

[okie john]

Good news.

What's the quality of the SA pull? Long/spongy, short/crisp, or somewhere between?


Okie John

[C4IGrant]

Good news.

What's the quality of the SA pull? Long/spongy, short/crisp, or somewhere between?


Okie John

The best DA pull I have felt.


C4

[Hot Sauce]

Grant, I'm assuming by the way you've tuned yours it's more aimed for competition use, or am I wrong? Perhaps just experimenting? Quite the hair trigger.

Also, wondering if anybody installed the CGW increased weight sear spring? What was the SA pull weight after it? I'm fine with a smooth DA anywhere between 6 and 10 lbs, and would prefer SA of as close to the standard 4/4.5 lbs as possible. More or less what I read from Mike Pannonne's review.

[matt7184]

Grant, when will you have these in stock? Are you going to be doing work on them as well?

[okie john]

The best DA pull I have felt.

Great. How's the single-action pull? Is it crisp or spongy?

Thanks,


Okie John

[Magsz]

The best DA pull I have felt.


C4

Grant...come on now. Dont you think that's a little sensational?

[Serpico1985]

Grant,

Was this trigger work done on stock parts? I can't comprehend how you could get a 5lb trigger pull out of stock parts. My 2014 P07 DA trigger is easily 11-12lb's, stagey and pretty horrible. Interested in your thoughts.

Thanks

[Magsz]

Grant,

Was this trigger work done on stock parts? I can't comprehend how you could get a 5lb trigger pull out of stock parts. My 2014 P07 DA trigger is easily 11-12lb's, stagey and pretty horrible. Interested in your thoughts.

Thanks

I believe he said he installed CGW's parts.

You're not getting a 5 lb da pull out of the factory parts...period. You MUST change the mainspring.

[C4IGrant]

Grant...come on now. Dont you think that's a little sensational?

No. I am specifically referring to the P-09 WITH all the CGN components PLUS a total internal polish job (took two + hours to complete). It is better than the HK's, Beretta's and SIG's I have in stock.


C4