Mag Pul AICS mags

[kev8287]

Will Mag Pul's AICS mags work with other any other companies bottom metal?

[pyrotechnic]

They should work with any bottom metal designed to accept AICS magazines

[abso]

They won't work in all receiver/bottom metal combinations. the one I specifically know about is that they won't fit in any Tikka T3 - the receiver opening isn't large enough to accept the larger than normal feedlips of magpul aics mags.

[Jwknutson17]

Mine work in seekins bottom metal in 300 win. They are a much tighter fit then the AICS but they work for me.

[TommyG]

As noted above, they should work with any that is patterned for AICS mags. I have a Rem 700 308 in an MDT chassis and they have been trouble free in that setup.

[ace4059]

Remington 700 with badger ordinance mag well has worked flawlessly with the magpul AICS mags. I have 6 magpul mags and no problems with any of them.

[kev8287]

Hey Thank You, for all your help. Just for FYI I'm wanting to add a detachable magazine to a hunting rifle (Remington 700 .30-06). I was wanting to use a Macmillan Game Scout stocl. Once again thanks for all your help

[gsd1983]

They will work with CDI as well, they are a bit tight though, as others have noted. On my Manners the DBM was bedded flush, so the smith popped the release lever out and trimmed it down a few thousandths and it works like a champ.

[Warg]

They work with Remy 700 with B.O. bottom metal as pointed out above and PTG bottom metal. Drop freely with both as well.

[Delta-3]

They also work with the Ruger Gunsite Scout rifle.