G&R Tactical
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Is the buffer normal?

  1. #11
    Join Date
    Oct 2017
    Posts
    121
    Feedback Score
    0
    I emailed them yesterday. I will report back what they say.

  2. #12
    Join Date
    Apr 2018
    Posts
    1
    Feedback Score
    0
    This has been answered in the other forum.
    You removed the retainer pin and the marks persist .
    The back of the retainer pin slot on the carrier has burrs on it obviously.
    Therefore sand the back of the carrier flat on some 400 grit on a flat surface and deburr these burrs with a small file or stone.

    UyRoL9.jpg
    Last edited by Madmotorhead; 05-07-18 at 16:34.

  3. #13
    Join Date
    Jan 2011
    Posts
    702
    Feedback Score
    2 (100%)
    It’s not a problem with the buffer, it’s caused by a burr on the BCG. Deburr and don’t worry about it.
    Quote Originally Posted by Outlander Systems View Post
    In 2014, a RDS and a WML are pretty much mandatory for a defensive long-gun.

    Lights are way easier to fire up than NODs when rolling out of bed.

    Quote Originally Posted by SJC3081 View Post
    You should have your balls removed for posting such stupidity. This is not the other site...

  4. #14
    Join Date
    Jun 2006
    Posts
    8,021
    Feedback Score
    0
    Quote Originally Posted by Clyde777 View Post
    Is this normal wear for a buffer with only 50 rounds through it? The buffer was new and put into my bcm lower and upper middy. Is the wear normal/okay?
    Attachment 51852

    It is fine, it won't hurt anything.
    Stick


    I have been asked to point out by board policy that I am Magpul's photographer. I have also done work for 150 or so manufacturers within the firearm community, my work has been used for web, catalog, banners, magazines, covers, etc. I have also shot work for the US Military where it has been used in training aids. I am prior service and a full time LEO.

    I also shoot and write for various publications. My primary focus is weapons, accessories and related equipment reviews. Manufacturers can reach me through any of the boards. If you have something new, let me know.

    MADE DEAD CENTER OF THE PNW

    Flickr Tumblr Facebook Instagram RECOILMAGAZINE OFF GRID RECOIL WEB

  5. #15
    Join Date
    Aug 2010
    Posts
    185
    Feedback Score
    8 (100%)
    Is your receiver extension not screwed in far enough?

    Only time I've seen that type of wear was on lower where the receiver extension could've used another rotation, went ahead and did such a rotation and the marks stopped.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •