So fas, so good; you didn't get damaged through the kaboom, Federal was cool and is taking care of the ammo. I'll keep my fingers crossed for your weapon. Is there anyone near by, or anyway that it can get checked before you hit the range just to be on the side?
With an AR, are you referring to a Go/No-go gauge, or using something like the Hornady L-N-L gauge that I use to determine seating depth in my bolt guns? Never really gave measuring headspacing a thought in my ARs due to the magazine limiting the length of any of my reloads.
Owner/Instructor at Semper Paratus Arms
Facebook: https://www.facebook.com/SemperParatusArms/
Semper Paratus Arms AR15 Armorer Course http://www.semperparatusarms.com/cou...-registration/
M4C Misc. Training and Course Announcements- http://www.m4carbine.net/forumdisplay.php?f=141
Master Armorer/R&D at SIONICS Weapon Systems- http://sionicsweaponsystems.com
Bullet length and seating depth determine cartridge overall length. The magazine limits the maximum cartridge OAL that can be fed through the magazine (although it does not limit the length of cartridges that are loaded one at a time). None of these dimensions has anything to do with headspace.
Bookmarks